カタログ >
Konecranes >
Munckloader Cranes

Munckloader Cranes
1 / 8ページ

カタログの抜粋

LIGHT LIFTING SYSTEMS GENERAL FABRICATION PROCESS EQUIPMENT CONTAINER HANDLING BULK HANDLING Lifting Businesses " MARINE CRANES TAILOR-MADE MARINE CRANES

カタログの1ページ目を開く

Konecranes Tailor-Made Marine Cranes KONECRANESMUNCKLOADER GANTRY CRANES FOR OPEN BULK & GENERAL CARGO/CONTAINER CARRIERS The Konecranes-Munckloader gantry cranes travelling along the rails on the ship deck are used to load and unload containers, unit cargo and bulk material. Vessels are typically equipped with two cranes working independently and reaching an unloading capacity of approximately 2,000 tons/h each. The heavy-duty, high-capacity electrically operated gantry cranes have the following features: > igid A-frame type construction r > ack and pinion drives for gantry, trolley, shift...

カタログの2ページ目を開く

CARGO CARRIER The gantry crane is designed for loading and unloading heavy cargo. Cargo carriers are equipped with two gantry cranes which travel along the rails on the ship deck. The cranes can work independently or together. The maximum load at twin hoist of the two cranes is 1,000 tons. The crane is equipped with a 33-ton auxiliary hoist which can also handle loads from outboard and can help in handling the cargo onboard. TYPICAL TECHNICAL DATA (CARGO CARRIER): Hoisting capacity Speed > Main hoist 2 x 250 tons 1.5 m/min > Aux. hoist 33 tons 4.5 m/min Lifting height 14 + 9 m > Travelling...

カタログの3ページ目を開く

Konecranes Tailor-Made Marine Cranes 2700-ton Barge Handling System for Seabee-Type Barge Carrier Main parts: > Lifting platform with an area of approximately 1,000 m2, which lifts two fully loaded barges to the appropriate deck level. > Hoisting machinery arrangement (2 x 4 units) for raising and lowering the lifting platform. > Two trolleys travel along the rails on the barges, powered by hydraulic cylinders from the platform, and convey them into the ship. > Railed crossing beams at the rear edge of each deck connect the trolley rails on the platform and on the decks; the crossing beams...

カタログの4ページ目を開く

crane vessel This crane has been designed and manufactured especially for the handling of drilling rigs and modules. The location of the counterweight below deck level and a special fork boom make it possible to move and operate the drilling rigs on a small-sized crane vessel. The fork boom is equipped with two 50-ton and two 10-ton hooks. For handling small loads and hoisting slings, a 5-ton trolley travels on the boom side. The crane is equipped with two tugger winches which damp the swinging of the load. The crane rotates through 360 degrees on a three-row roller bearing. All crane...

カタログの5ページ目を開く

Konecranes Tailor-Made Marine Cranes crane vessel These 600-ton revolving cranes are mounted on catamaran-hulled vessels for offshore work. The cranes incorporate two independent main hooks, each with a capacity of 300 tons; an auxiliary hook of 150 tons; and a trolley with a 20-ton hook that travels along almost the entire length of the box girder boom. The maximum outreach is 69 m and the lifting height is 92 m above the water level. The main hook block can be coupled together by a hoisting beam with one four-prong 600-ton hook. Due to the eccentric position of the crane, weight has to be...

カタログの6ページ目を開く

The 1,600-ton revolving crane is mounted on the stern of a self-propelled crane vessel. The crane, designed by Gusto Engineering BV, is equipped with two 800-ton main hooks which can be operated separately, a 400-ton auxiliary hook, and a trolley with a 30-ton hook, which can travel along the length of the box girder crane boom. To lift the maximum load of 1,600 tons, the two main blocks can be used independently, allowing an angle with the vertical up to a maximum 15 degrees, or they can be coupled together with a hoisting beam and a 1,600-ton hook. As the vessel has an active ballast...

カタログの7ページ目を開く

Yard Cranes Reach Stackers FORKLift trucks container trucks Straddle Carriers Bulk Unloaders Shipyard Cranes Konecranes is a world-leading group of Lifting Businesses™, serving a broad range of customers, including manufacturing and process industries, shipyards, ports and terminals. Konecranes provides productivity-enhancing lifting solutions as well as services for lifting equipment and machine tools of all makes. In 2007, Group sales totaled EUR 1,750 million. The Group has 8,400 employees, at more than 470 locations in 43 countries. Konecranes is listed on the OMX Nordic Exchange...

カタログの8ページ目を開く