カタログ >
ISOLTEMA GROUP >
ELOTENE DSN 800

ELOTENE DSN 800
1 / 2ページ

カタログの抜粋

COMPATIBLE WITH MOST PU ADHESIVES Waterproofing Membranes ELOTENE DSN 800 Self-Adhesive Bituminous Reinforced Membrane Total Vapour Barrier for Roof Application. Elotene DSN 800 is a self-adhesive bituminous waterproofing membrane that forms a total barrier against vapour. The product consists of a self-adhesive low-thickness bituminous compound, self-protected by a reinforced aluminium foil and a fibreglass net. The so composed film makes the membrane resistant to heavy worksite traffic and suitable for applications that involve high mechanical stresses. Standard Lengths: 40 m * Standard Thicknesses: 0.6 mm * Standard Width: 1080 mm * Other lengths and thicknesses are available on request. The rolls are packed individually in cardboard boxes and placed on pallets. • Total Vapour Barrier; • Provides a surface on which most polyurethane adhesives will adhere strongly; • Excellent tensile strength; • Waterproof & Self-adhesive; • Self-sealing; • Cold applied without use of flames. SURFACE PREPARATION All surfaces on which Elotene Waterproofing membranes have to be installed must be dry, clean, smooth and free of impurities. If the surface is porous, apply a coat of Primer in a quantity of 75 - 150 g/sqm. The use of Primer is in any case advisable, and the manufacturers instructions must be followed. A wrong use of Primer can influence the membrane efficiency. • Total Vapour Barrier for metal deck application; • Total Vapour Barrier for composite multilayer insulation systems; • Carrier membrane for composite multilayer insulation systems. * The product dimensions may vary within defined ranges because of the product characteristics and its manufacturing process. For further information please visit www.isoltemagroup.com

カタログの1ページ目を開く

TECHNICAL DATA Peel Resistance of Joints Shear Resistance of Joints Application Temperature Service Temperature Thickness Tensile Strength Elongation at Break Tear Resistance Impermeability Water Vapour Impermeability * For temperatures below 5 °C, it is recommended to use special and additional precautions to facilitate adhesion (for example a specific primer for TEST Complying with: EN 13969 type A and T; EN 13970; EN 13707 Classification for transport: Not Applicable Reaction to fire: E (EN 13501 - 1) Total Volatile Organic Compound emissions (TVOC): 8 µg/m3 (ISO 16000-6) Insulation...

カタログの2ページ目を開く