カタログの抜粋
Vinyl Anticorrosive PRODUCT DESCRIPTION A one pack, tar free vinyl anticorrosive which can be used at temperatures down to 23°F. INTENDED USES PRODUCT INFORMATION As an anticorrosive for both above and below the waterline and also as a sealer coat over Tributyltin (TBT) Suitable for use with controlled cathodic protection. For use at Newbuilding, Maintenance & Repair or On Board Maintenance. Part B (Curing Agent) Volume Solids Typical Film Thickness Theoretical Coverage Flash Point Induction Period 214 ft2/US gal at 3 mils dft, allow appropriate loss factors Airless Spray, Brush, Roller Drying Information Overcoating Data - see limitations Substrate Temperature Note For other antifoulings, consult International Paint. REGULATORY DATA 529 g/lt (4.41 lb/US gal) as supplied (EPA Method 24) 498 g/kg of liquid paint as supplied. EU Solvent Emissions Directive (Council Note: VOC values are typical and are provided for guidance purposes only. These may be subject to variation depending on factors such as differences in color and normal manufacturing tolerances. Marine Coatings
カタログの1ページ目を開くVinyl Anticorrosive SURFACE PREPARATIONS When used as part of an approved scheme, this product has the following certification: When tested in accordance with ASTM D5108-96 (modified) Intertuf 203 forms a barrier to TBT leaching from an underlying TBTantifouling. Long term testing is ongoing. Consult your International Paint representative for details. Consult your International Paint representative for the system best suited for the surfaces to be protected. Use in accordance with the standard Worldwide Marine Specifications. All surfaces to be coated should be clean, dry and free from...
カタログの2ページ目を開くVinyl Anticorrosive Airless Spray Conventional Spray This material is a one pack coating and should always be mixed thoroughly with a power agitator before Not recommended. Use International GTA007 only in exceptional circumstances. DO NOT thin more than allowed by local environmental legislation. Total output fluid pressure at spray tip not less than 3000 psi (211 kg/cm2) Application by conventional spray is not recommended. Application by brush is recommended for small areas only. Multiple coats may be required to achieve specified film thickness. Application by roller is recommended for...
カタログの3ページ目を開くVinyl Anticorrosive Optimum performance is achieved when Intertuf 203 is applied over blasted steel. Intertuf 203, JVA202 aluminium must be specified as the first coat in an anticorrosive system. Overcoating information is given for guidance only and is subject to regional variation depending upon local climate and environmental conditions. Consult your local International Paint representative for specific recommendations. Apply in good weather. Temperature of the surface to be coated must be at least 5°F above the dew point. For optimum application properties bring the material to...
カタログの4ページ目を開くInternational Marineのすべてのカタログとパンフレット
-
Intergard 5000
4 ページ
-
Interline 975P
4 ページ
-
Interline 994LT
4 ページ
-
Interline 644
4 ページ
-
Interspeed 5617
4 ページ
-
Intersmooth 7670 SPC
4 ページ
-
Interflex 8700 SPC
4 ページ
-
Interplate Zero
4 ページ
-
Intergard 269
4 ページ
-
Interline 850
4 ページ
-
Intersleek 1100SR
4 ページ
-
Intersleek 717
4 ページ
-
Interfine 878
4 ページ
-
Intershield 456
4 ページ
-
Intershield 851
4 ページ
-
Intershield 852
4 ページ
-
Intershield 803Plus
4 ページ
-
Intercept 7000
1 ページ
-
Interbond 808
2 ページ
-
Integard 5555 PIC
2 ページ
-
Intertrac Vision
4 ページ
-
Intersleek 1000
6 ページ
-
Intershield 5150LWT
2 ページ
-
Intershield 300
8 ページ
-
Interline 9001
6 ページ
-
Interflex 8700 PIC
2 ページ
-
Fisheries
2 ページ
-
Interline 904
2 ページ
-
Intershield 6GV
2 ページ
-
Intersleek 700
2 ページ
-
Interswift 6600
2 ページ
-
Interswift 6800HS
2 ページ
-
Intergard 5400 PIC
2 ページ
-
Interspeed-5640
2 ページ
-
Intershield 300V
4 ページ
-
Intergard 821
4 ページ
-
Intertherm 50
4 ページ
-
Intergard 403
4 ページ
-
Intersleek
6 ページ
-
Cargo Tank Coatings
7 ページ
-
Cargo Hold Coatings
7 ページ
-
Intercept 8000 LPP
4 ページ
-
Interswift 6900Si
4 ページ
-
Intergard 7500
2 ページ
-
Intergard 7020
2 ページ
-
Interline®9001
5 ページ
-
Interplate® Zero
11 ページ
-
Hydroblasting Standards
15 ページ
-
Maintenance and Repair
19 ページ
-
Slurryblasting Standards
14 ページ
-
Cargo Hold
8 ページ
-
Abrasive Sweep Standards
12 ページ
-
Colour Card
2 ページ
-
Interprime 65
4 ページ
-
Interline 104
4 ページ
-
Intersleek 386
4 ページ
-
Intersleek 737
4 ページ
-
Intersleek 970
4 ページ
-
Intersmooth 360 SPC
4 ページ
-
Interspeed 6400
4 ページ
-
Interswift 655
4 ページ
-
Intertuf 362
4 ページ
-
Intersmooth 365 SPC
4 ページ
-
Interswift 455FB
4 ページ
-
INTERLAC 678
4 ページ
-
INTERGARD 400
4 ページ
-
INTERFINE 629HS
4 ページ
-
INTERTHANE 990
4 ページ
-
INTERBOND 501
4 ページ
-
INTERPRIME 198
4 ページ
-
BALLAST TANK BROCHURE
13 ページ
カタログアーカイブ
-
Intergard 343
9 ページ