カタログ >
International Marine >
Interspeed 5617

Interspeed 5617
1 / 4ページ

カタログの抜粋

Interspeed 5617 TBT Free CDP Antifouling PRODUCT DESCRIPTION A TBT free controlled depletion polymer (CDP) antifouling which releases biocide at a controlled, consistent rate continuously exposing a fresh active antifouling surface. Interspeed 5617 provides up to 30 months in-service period, dependant upon trading conditions and specification applied. INTENDED USES In repair situations Interspeed 5617 can be applied directly over existing antifoulings. For use at Newbuilding or Maintenance & Repair. PRODUCT INFORMATION Part B (Curing Agent) Volume Solids Typical Film Thickness Theoretical Coverage 174 ft²/US gal at 6 mils dft, allow appropriate loss factors Airless Spray, Brush, Roller Flash Point Drying Information Before Flooding Overcoating Data - see limitations Substrate Temperature REGULATORY DATA 385 g/lt (3.21 lb/US gal) as supplied (EPA Method 24) 188 g/kg of liquid paint as supplied. EU Solvent Emissions Directive (Council Directive 1999/13/EC) Note: VOC values are typical and are provided for guidance purposes only. These may be subject to variation depending on factors such as differences in color and normal manufacturing tolerances. Marine Coatings Page 1 of 4 Issue Date:7/7/2016

カタログの1ページ目を開く

Interspeed 5617 TBT Free CDP Antifouling CERTIFICATION When used as part of an approved scheme, this material has the following certification: Product recognised by the following classification societies as compliant with the International Convention on the Control of Harmful Anti-fouling Systems on Ships, 2001 (AFS 2001): • Det Norske Veritas • Lloyds Register Consult your International Paint representative for details. Consult your International Paint representative for the system best suited for the surfaces to be protected. SURFACE PREPARATIONS Use in accordance with the standard...

カタログの2ページ目を開く

Interspeed 5617 TBT Free CDP Antifouling APPLICATION Mixing This material is a one pack coating and should always be mixed thoroughly with a power agitator before application. Not Recommended. Use International GTA007 only in exceptional circumstances (max 5% by volume). DO NOT thin more than allowed by local environmental legislation. Airless Spray Recommended Tip Range 26-36 thou (0.66-0.91 mm) Total output fluid pressure at spray tip not less than 3000 psi (211 kg/cm²) Conventional Spray Application by conventional spray is not recommended. Application by brush is recommended for small...

カタログの3ページ目を開く

Interspeed 5617 TBT Free CDP Antifouling LIMITATIONS If the following maximum recommended exposure times before flooding are exceeded, antifouling performance may be impaired: Temperate conditions - 6 months Tropical conditions - 3 months On immersion Interspeed 5617 may exhibit a slight colour change. Apply in good weather. Temperature of the surface to be coated must be at least 5°F above the dew point. For optimum application properties bring the material to 70°F-81°F, unless specifically instructed otherwise, prior to mixing and application. Unmixed material (in closed containers)...

カタログの4ページ目を開く