カタログ >
International Marine >
Intergard 7500

Intergard 7500
1 / 2ページ

カタログの抜粋

Intergard 7500 ® High Solids Pure Epoxy Universal Primer Performance Product Description A high volume solids, light coloured, aluminium pure epoxy universal primer with good corrosion protection, abrasion resistance and low temperature application capability. For use at Newbuilding. Suitable for use with controlled cathodic protection. Features Benefits Aluminium pigmented pure epoxy formulation Long term asset protection Good corrosion protection and abrasion resistance Reduced maintenance costs compared to modified epoxy ballast tank coating / universal primer IMO PSPC compliant Meets latest regulatory requirements High (80%) volume solids Reduced solvent emissions Increased production efficiency^ Advanced rheology technology+ Improved application efficiency and reduced spray dust compared with conventional high solids products∞ Improved high solids resin system* Excellent application properties Universal application Improved building efficiency compared to using different primers for different vessel areas Simplified coating scheme and procedures Application and fast drying at low temperature down to -5°C Single product for year round workability and fast access Intergard®7500 is type approved for PSPC (Performance Standard for Protective Coatings) over a range of pre-construction primers. Excellent crack resistance at high DFT: Intergard®7500 at 2 x 450µm DFT- cycled between seawater and 80°C dry conditions. No defects after 6 cycles (12 months). Product Information Colour KUA750 Bronze, KUA751 Light Red, KUA752 Aluminium Surface preparation Surface should be clean, dry and free from contamination Volume solids 80% ±2% (ISO 3233:1998) Typical film thickness 160 microns dry (200 microns wet) – water ballast tank Range 100~200 microns – as universal primer Hard dry 14 hours at 5°C Minimum application temperature -5ºC Method of application Airless Spray, Brush, Roller ^ Compared to our lower solids universal primers + See overleaf for more information * Compared to all other universal primers available from International Paint ∞ Our universal primers with more than 78% volume solids For each of our products the relevant Product Data Sheet, Material Safety Data Sheet and package labelling comprise an integral information system about the product in question. Copies of our Product Data Sheets and Material Safety Data Sheets are available on request or from our website. Excellent corrosion resistance: Intergard®7500 at 2 x 160µm DFT -18 months seawater immersion at 25°C

カタログの1ページ目を開く

Intergard 7500 ® Rheology Technology VISCOSITY STORAGE Application track record Rheology technology is used in coating formulations to achieve a balance between application and film forming properties. ANTI-SETTLING (SHELF-LIFE) TRANSPORTATION Designed with advanced rheology, Intergard®7500 is high solids and provides improved airless spray workability with less thinner use, as well as giving good resistance to sagging. ANTI-SETTLING STIRRING FILM FORMATION EASY MIXING (THINNING) SPRAY PATTERN ATOMISATION SPRAY PRESSURE APPLICATION ANTI-SAGGING (HOLD-UP) LEVELLING (APPEARANCE)...

カタログの2ページ目を開く