カタログ >
Imes >
CCM Gas Engine control

CCM Gas Engine control
1 / 3ページ

カタログの抜粋

Application: - 4 stroke marine and stationary Gas Engines up to 1800 RPM Technical data Combustion Control Module (CCM) Multichannel data acquisition unit 12 analogue inputs for pressure 4 ... 20mA, max. sampling resolution 0,1°CA ADC resolution: 12 bit CAN J1939 SAE standard interface Fast Ethernet LAN Interface lOOMBits/s Cylinder pressure sensor HTT-04CA® Marine classification ATEX type arroval CSA type approval Bureau Veritas DNV-GL American Bureau of shipping Lloyd's RegIster NK Class China Classification Society Group II, Category 3G 2572163 Cylinder pressure sensor CPS-OICA® Marine classification DNV-GL China Classification Society Class NK ® Registered Trade mark

カタログの1ページ目を開く

By continuous analysing combustion paramo ters of every cylinder, combustion contol module (CCM) enables instant detection of combustion knock, misfire, Peak pressure and IMEP. Operation parameters can be adjusted imme diately to achieve the best possible power and performance irrespective of the gas quality.

カタログの2ページ目を開く

CCM incl. firmware - CCM mounted in Alu -housing for 1... 12 cylinder incl. connectors 1 x CAN Bus, 1 x LAN/Ethernet, 1 x 24 VDC, 2 x pulse - Firmware Sensors , cable and terminal box - Terminalbox 1... 12 cylinder incl. 10m cable and connector to CCM - HTT-04CA® sensor range 0...300 bar - CPS-01CA® sensor range 0...300 bar - FPS-01CA sensor range 0...300 bar - Sensor connecting cable 5 m - Sensor connecting cable 10m imes gmbh . dr-herbert-kittel-str. 2 I his information corresponds to the current state of know ledge. Liability for consequential damage resulting from the use of IMES...

カタログの3ページ目を開く

CCM Gas Engine control 1 / 3ページ

カタログの抜粋

Imesのすべてのカタログとパンフレット

CCM Gas Engine control
1 / 3ページ