カタログ >
Icom >
IC-F9511HT

IC-F9511HT
1 / 4ページ

カタログの抜粋

VHF P25 CONVENTIONAL & TRUNKED TRANSCEIVER Photo includes optional RMK-4,OPC-609 and SP-30

High Power Mobile for Ready for: P25 conventional, P25 trunking and analog conventional. All in one radio! P25 Conventional & Trunking Features The IC-F9511HT comes with P25 VHF conventional and trunking capabilities. You can assign individual channels to analog con- ventional, P25 conventional or P25 trunking, all within one radio. The IC-F9511 HT conforms to standard specifications for TIA/EIA -102, CAAB, Digital C4FM Transceiver Performance Recommen- dations. Provides interoperability with other brand P25 equipment for public safety applications. Digital/Analog mixed mode operation The...

カタログの2ページ目を開く

110W of powerful RF output A full 110W of output power is available for reliable long distance communication. A large heat sink provides effective cooling mechanism allowing continuous duty cycle operation (20% duty cycle transmission). IP54 dust and water resistance The controller and RF unit have IP54 dustprotection and splash resistance allowing it to be used in wet and dusty conditions. ble channel and communication group management. The CTCSS and DTCS encoder and decoder* are also built-in to set up your own talk groups. * Analog mode only. Dot matrix, multi-function LCD With a high...

カタログの3ページ目を開く

VHF P25 CONVENTIONAL & TRUNKED TRANSCEIVER SPECIFICATIONS GENERAL • Frequency range • Number of channels : 136–174MHz : Max. 512 channels/ 128 zones • Channel spacing : 15/30kHz (analog) 12.5kHz (digital) • PLL channel step : 2.5kHz, 3.125kHz • Emission designators : Analog (wide/narrow) 16K0F3E/11K0F3E Digital 8K10F1E, 8K10F1D • Antenna impedance : 50Ω (SO-239) • Operating Temp. range : –30˚C to +60˚C ; –22˚F to +140˚F • Power supply requirement : 13.6V DC nominal • Current drain (approx.) : Tx High (110W) 22.0A Rx Max. audio 3.0A Stand-by 400mA • Dimensions (W×H×D) (projections not...

カタログの4ページ目を開く