カタログ >
Hubbell Marine Electrical Products >
ELCI Interface Solutions

ELCI Interface Solutions
1 / 2ページ

カタログの抜粋

Marine Products ELCI Interface Solutions 30 Amp and 50 Amp (Updated April 2011) New ABYC Code Requirements Effective July 31, 2010 Hubbell Marine Electrical continues its tradition of innovation by developing a simple, flexible method of adapting a variety of ELCI Sensors and Breakers to our traditional Stainless Steel and Non-Metallic Shore Power Inlet Housings. Effective July 31, 2010, ABYC, E-11.11.1. requires that “An Equipment Leakage Circuit Interrupter (ELCI) shall be installed with or in addition to the main shore power disconnect circuit breaker(s) or at the additional over current protection as required by E-11.10.2.8.3, whichever is closer to the shore power connection". Hubbell’s new family of ELCI adaptive Shore Power Inlet Kits provide a simple, flexible, low-cost solution. Kits contain: • Hubbell Shore Power Inlet • Matching Shore Power Inlet Housing(s) • Mounting Adapter Plate(s) for use with various ELCI Sensors and ELCI Breakers (not provided) • Stainless Steel Hardware An Equipment Leakage Circuit Interrupter (ELCI) provides 30mA ground fault protection for the entire AC shore power system beyond the ELCI

カタログの1ページ目を開く

Marine Products ELCI Interface Solutions 30 Amp and 50 Amp (Updated April 2011) Hubbell ELCI Adapter Kits for North Shore Safety, Ltd® PGFM Series (ELCI Marine) Sensing Module and Sensata Technologies® ELCI Breakers Description Catalog Number 30 Amp, 125 Volt Non-Metallic Inlet (HBL303NM) and (2) Non-Metallic Inlet Housings, Adapter Plates and Hardware. 30 Amp, 125 Volt Non-Metallic Inlet (HBL303NM) and (1) Non-Metallic Inlet Housing that adapts to North Shore Safety’s Sensor only (no circuit breaker inlet housing), Adapter Plate and Hardware. 30 Amp, 125 Volt Stainless Steel Inlet...

カタログの2ページ目を開く