カタログの抜粋
WINCHES A larger diameter in the drum means more traction on the rope and more efficiency in self-tailing. Larger internal body diameter allows the use of aluminium and thinner walls resulting in a much lighter part. Low profile and less weight, reaching 20% less in the #44. All winches bigger than the #44 present a roller bearing around the base resulting in a much more stable body, independent from the origin of the load. All shafts use roller bearings or highly-resistant autolubricated synthetic bushing. Self tailing and self-adjusting for a variety of rope diameters. Off-centre axle means more space for gears with the same base diameter the winch delivers greater mechanical advantage. This is a plus in high-load action and even allows the use of a shorter handle in lighter winds. First gear 1525% higher allows a longer period of ‘pumping’ before using the second gear. Fixing Size Drum Gearing Ratio 1 Dia. (mm) Drum Base Bearing Fixing Size Line Dia. Overall Base Height Dia. (mm) Dia. (mm) (mm) (mm) Height (mm) (mm)
カタログの1ページ目を開くHoltのすべてのカタログとパンフレット
-
Marine Pre Packs22 ページ
-
PSP Marine Tapes3 ページ
-
Clamcleats®4 ページ
-
Shackles and Rigging11 ページ
-
Hull & Deck Fittings8 ページ
-
Holt Blocks Catalogue11 ページ
-
cleats-and-clutches2 ページ
-
psp-marine-tapes3 ページ
-
clamcleats4 ページ
-
accessories10 ページ
-
sail-makers-hardware2 ページ
-
shackles-and-rigging11 ページ
-
winches1 ページ
-
blocks11 ページ
カタログアーカイブ
-
HOLT 2010 Catalogue211 ページ
