カタログ >
Hempel >
HEMPEL'S CLASSIC VARNISH 01150

HEMPEL'S CLASSIC VARNISH 01150
1 / 2ページ

カタログの抜粋

Description: Recommended use: Availability: PHYSICAL CONSTANTS: Shade nos/Colours: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch: Dry to sand: VOC content: Shelf life: APPLICATION DETAILS: Application method: Thinner (max.vol.): Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Overcoat interval, min: Overcoat interval, max: HEMPEL'S CLASSIC VARNISH 01150 is a traditional clear alkyd varnish containing tung oil resulting in a flexible, long lasting finish. Good resistance to seawater, sunlight and adverse weather conditions. For use on new wood as well as on previously varnished wood, interior and exterior, above the waterline. Part of European Yacht assortment. Local availability subject to confirmation. 00000/ Transparent High-gloss 52 ± 1 17 m2/l [681.7 sq.ft./US gallon] - 30 micron/1.2 mils 38 °C [100.4 °F] 0.9 kg/litre [7.7 lbs/US gallon] 6 hour(s) 20°C/68°F 12 hour(s) 10°C/50°F 24 hour(s) 20°C/68°F 48 hour(s) 10°C/50°F 377 g/l [3.1 lbs/US gallon] 5 years 25°C/77°F The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. Brush/Paint pad HEMPEL'S THINNER 811 (No 1) 08111 (Brush/Paint pad): max. 20%. HEMPEL'S THINNER 811 (No 1) 08111 30 micron [1.2 mils] 60 micron [2.4 mils] 8 hour(s) 20°C/68°F 16 hour(s) 10°C/50°F 2 day(s) 20°C/68°F 4 day(s) 10°C/50°F Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Safety Data Sheets and follow all local or national safety regulations. Date of issue: August 2016

カタログの1ページ目を開く

Product Data HEMPEL'S CLASSIC VARNISH 01150 SURFACE PREPARATION: Preparation: Always ensure all surfaces are clean, oil free and dry. Clean the surface and remove possible oil and grease with a suitable detergent and sand with dry abrasive paper. Carefully remove dust with fresh water. New wood: Sand and remove all dust. Saturate the dry, clean surface with suitable wood treatment, allow to dry. Plywood: Sand and remove all dust. Seal the dry clean surface with suitable wood sealer. Teak: Degrease the surface thoroughly with a suitable degreaser. Previously damaged varnished wood: Wood...

カタログの2ページ目を開く