カタログ >
Hempel >
HEMPADUR MULTI-STRENGTH 45701-45703

HEMPADUR MULTI-STRENGTH 45701-45703
1 / 2ページ

カタログの抜粋

Product Data HEMPADUR MULTI-STRENGTH 45701 / HEMPADUR MULTI-STRENGTH 45703 Medium to high temperatures 45701: BASE 45705: CURING AGENT 97652 Low to medium temperatures 45703: BASE 45705: CURING AGENT 98750 Description: HEMPADUR MULTI-STRENGTH 45701/45703 is a self-priming, two-component, highbuild, aluminium pigmented pure epoxy paint which cures to an abrasion and corrosion resistant coating. Recommended use: As a primer for MULTI-STRENGTH systems for immersion and splash-zone service. Service temperature: Maximum, dry exposure only: 140°C/284°F (see REMARKS overleaf.) In water (no temperature gradient): 50°C/122°F Other immersion service: Contact HEMPEL A/S Availability: Not included in Group Assortment. Availability subject to special agreement. PHYSICAL CONSTANTS: Version; mixed product: Shade nos/Colours: Finish: Volume solids, %: Theoretical spreading rate: Flash point: Specific gravity: Dry to touch: Fully cured: VOC content: 45701 19880 / Dark-Alu. Semi-gloss 68 ± 1 3.4 m2/l [136.3 sq.ft./US gallon] - 200 micron/8 mils 27 °C [80.6 °F] 1.5 kg/litre [12.7 lbs/US gallon] 7 - 8 hour(s) 20°C/68°F 7 day(s) 20°C/68°F 272 g/l [2.3 lbs/US gallon] 45703 19880 / Dark-Alu. Semi-gloss 70 ± 1 3.5 m2/l [140.4 sq.ft./US gallon] - 200 micron/8 mils 27 °C [80.6 °F] 1.5 kg/litre [12.5 lbs/US gallon] 8 - 10 hour(s) 10°C/50°F 14 day(s) 10°C/50°F 256 g/l - The physical constants stated are nominal data according to the HEMPEL Group's approved formulas. APPLICATION DETAILS: Version; mixed product: Mixing ratio: Application method: Thinner (max.vol.): Pot life: Nozzle orifice: Nozzle pressure: Cleaning of tools: Indicated film thickness, dry: Indicated film thickness, wet: Recoat interval, min: Recoat interval, max: Safety: Date of issue: January 2012 - 45701 45703 BASE 45705: CURING AGENT 97652 BASE 45705: CURING AGENT 98750 3 : 1 By volume 3 : 1 By volume Airless spray Airless spray 08450 (5%) (See PRECEDING COAT overleaf) 1 hour(s) 20°C/68°F 1 hour(s) 20°C/68°F 0.021 - 0.023 " 250 bar [3625 psi] (Airless spray data are indicative and subject to adjustment) HEMPEL'S TOOL CLEANER 99610 200 micron [8 mils] 300 micron [12 mils] According to separate APPLICATION According to separate APPLICATION INSTRUCTIONS INSTRUCTIONS According to separate APPLICATION According to separate APPLICATION INSTRUCTIONS INSTRUCTIONS Handle with care. Before and during use, observe all safety labels on packaging and paint containers, consult HEMPEL Safety Data Sheets and follow all local or national safety regulations. Page: 1/2 Product Data Sheet

カタログの1ページ目を開く

HEMPADUR MULTI-STRENGTH 45701 45703 SURFACE PREPARATION: New steel: Abrasive blasting to min. Sa 2½. (ISO 8501-1:1988) Grit surface profile, Rz minimum 100 micron - maximum 150 micron, corresponding to ISO Comparator Coarse (G). Oil and grease must be removed by suitable detergent, salts and other contaminants by (high pressure) fresh water hosing prior to blasting. After blasting, clean the surface carefully from abrasives and dust. Repair and maintenance: Remove oil and grease etc. thoroughly with suitable detergent. Remove salts and other contaminants by high pressure fresh water...

カタログの2ページ目を開く