カタログの抜粋
General Datasheet ST 110 CAR BODY PANEL SYSTEM SPRINT™ RESIN ¬ Drape and thickness optimised for excellent handling Ideal for complex or vertical mouldings Excellent balance of mechanical performance and toughness Suitable for autoclave and vacuum bag processing INTRODUCTION Structural ST 110 is used to form a multi layered material referred to as CBS Car Body SPRINT for body and closure panels for automotive applications. ST 110 is used alongside a suitable surfacing film (SF80, SF80FROBL or SF96) and SY110 Syntactic Core to build up a CBS panel. The woven carbon and glass reinforcements can be used to lay up various panel combinations to suit the required stiffness and weight targets needed.
カタログの1ページ目を開く
INSTRUCTIONS FOR USE CURING SCHEDULE It is important to take care unrolling the material to avoid wrinkling or creasing the product. Do not leave the rolls lying flat on a bench/floor or box, as this will flatten one side of the product roll. 1. Place the ST 110 into the laminate lay-up as desired; it is usual for both faces of the ST 110 to be covered with a prepreg or SPRINT™ material to form an in-situ sandwich construction. 2. If required apply a peel ply, pre-impregnated or dry, over the top of the laminate stack. Note that for good secondary bonding of a peel-plied laminate, a nylon...
カタログの2ページ目を開く
CURED LAMINATE PROPERTIES Cured laminate data is currently being generated for ST 110.
カタログの3ページ目を開く
NOTICE All advice, instruction or recommendation is given in good faith but the selling Gurit entity (the Company) only warrants that advice in writing is given with reasonable skill and care. No further duty or responsibility is accepted by the Company. All advice is given subject to the terms and conditions of sale (the Conditions) which are available on request from the Company or may be viewed at Gurit's Website: www.gurit.com/terms-and-conditions.aspx The Company strongly recommends that Customers make test panels in the final process conditions and conduct appropriate testing of any...
カタログの4ページ目を開くGuritのすべてのカタログとパンフレット
-
GURIT® BALSAFLEX™4 ページ
-
CORECELL™ S3 ページ
-
CORECELL™ T3 ページ
-
GURIT® PVC3 ページ
-
CORECELL™ A3 ページ
-
SPABOND™ 3457 ページ
-
SPABOND™ 7304 ページ
-
T-Prime 1608 ページ
-
T-Prime 130-1 (v5)8 ページ
-
SMARTCURE™ (v9)4 ページ
-
T-Lam 130-1 Slow6 ページ
-
T-Gel 130-16 ページ
-
T-Paste 70-26 ページ
-
CR 34005 ページ
-
Gurit® Kerdyn® Green4 ページ
-
Aerospace2 ページ
-
PB10004 ページ
-
HI-PANEL2 ページ
-
Gurit G-PET1 ページ
-
Eposeal 3006 ページ
-
Ampreg 268 ページ
-
Ampreg 21FR6 ページ
-
ST 956 ページ
-
PREPREGS11 ページ
-
CORE MATERIALS9 ページ
-
ADHESIVES5 ページ
-
WE91 - 24 ページ
-
WE91 - 14 ページ
-
SE 85 GT5 ページ
-
SE 855 ページ
-
SE 84 Nano5 ページ
-
PH 8404 ページ
-
PN 9014 ページ
-
SE 3004 ページ
-
SC 1104 ページ
-
SE 2005 ページ
-
ST 164 ページ
-
SE 84LV6 ページ
-
ST 706 ページ
-
SE 705 ページ
-
SPABOND 340LV HT6 ページ
-
SPABOND 3454 ページ
-
SPABOND 3407 ページ
-
SPABOND 340LV6 ページ
