カタログ >
Gurit >
SC 110T2 - Visual Carbon Prepreg (v9)

SC 110T2 - Visual Carbon Prepreg (v9)
1 / 4ページ

カタログの抜粋

SC 110T2 - Visual Carbon Prepreg (v9) - 1

Full General Datasheet SC 110T2 VISUAL CARBON PREPREG ¬ Ultra high clarity – ideal for visual components with no white-wash or spots High-strength prepreg system Versatile process window with autoclave and press moulding 20 minute cure at 150°C (300°F) in a press High tack allowing easy in-mould repositioning INTRODUCTION SC 110T2 is a visual grade prepreg that utilises a high clarity, versatile, hot-melt epoxy resin formulation. The unique formulation ensures that no white-wash or spots are evident in the cured resin. It is ideal for manufacturing high visual quality components using autoclave and press moulding. It can be cured at temperatures as low as 80°C (175°F), or it can be used for faster moulding of components at 120°C (250°F). An even faster cure of 20 minutes at 150°C (300°F) can also be achieved using the appropriate press moulding technology. This is achieved whilst maintaining a good out-life of up to 3 weeks at 21°C (70°F). SC 110T2 is a toughened system and offers excellent mechanical properties on a wide variety of reinforcing fabrics and fibres. During the development of SC 110T2, extensive beta testing has been conducted to manufacture the most challenging visual components in order to demonstrate the robustness of the unique resin formulation. Tight curvature, resin rich seams and numerous components have been produced through autoclave and press moulding processes without any sign of white wash or spots. SC 110T2 is suitable for interior and exterior automotive, marine and other markets where a high clarity finish is required.

カタログの1ページ目を開く

SC 110T2 - Visual Carbon Prepreg (v9) - 2

TRANSPORT & STORAGE When stored sealed & out of direct sunlight. SC 110T2 visual carbon prepreg is available in a range of product formats. Please consult your local sales contact for further information. SC 110T2 is proven to meet automotive OEM environmental standards for interior and exterior parts following the application of a suitable lacquer. Full contact details can be found at www.gurit.com. PREPREG PROPERTIES RHEOLOGY DATA SC 110T2 resin viscosity profile conducted at 1°C (1.8°F) per minute. *suitable for use in conjunction with hot-in / hot-out rapid component manufacture is...

カタログの2ページ目を開く

SC 110T2 - Visual Carbon Prepreg (v9) - 3

CURED RESIN PROPERTIES Oven cured using standard processing techniques and recommended cure cycles on a single batch of material.

カタログの3ページ目を開く

SC 110T2 - Visual Carbon Prepreg (v9) - 4

NOTICE All advice, instruction or recommendation is given in good faith but the selling Gurit entity (the Company) only warrants that advice in writing is given with reasonable skill and care. No further duty or responsibility is accepted by the Company. All advice is given subject to the terms and conditions of sale (the Conditions) which are available on request from the Company or may be viewed at Gurit’s Website: www.gurit.com/terms-and-conditions.aspx The Company strongly recommends that Customers make test panels in the final process conditions and conduct appropriate testing of any...

カタログの4ページ目を開く