カタログ >
Gurit >
PH 840

PH 840
1 / 4ページ

カタログの抜粋

PH 840 ESTABLISHED RAIL INTERIOR PHENOLIC PREPREG ¬ Excellent Fire, Smoke & Toxicity (FST) behaviour Excellent mechanical behaviour Good surface finish Autoclave-free processes possible Short curing time 15 min at 160ºC / 320ºF Long shelf and shop life INTRODUCTION PH 840 is a halogen-free modified phenolic system, designed for laminate with bright colour and good surface quality. This prepreg material has been developed for industrial and rail applications with high specific mechanical properties and excellent FST (low heat-release and smoke-density) behaviour. PH 840 can be cured between 120°C and 160°C (248°F and 320°F). Monolithic and sandwich structures can be easily manufactured with this prepreg. The curing can be performed by press, vacuum and autoclave moulding with a pressure of at least 0.7 bar / 10 psi. Suitable for composite structures experiencing in-service temperatures of -55ºC up to +80ºC. PH 840 prepreg is suitable for: Rail industries Industrial industries Marine and automotive applications

カタログの1ページ目を開く

PRODUCT INFORMATION PH 840 phenolic prepreg is available in a range of product formats. Please consult your local sales contact for further information. Full contact details can be found at www.gurit.com. PROPERTY Resin Flow Fibre Material Fabric Weight Weave Style Typical Roll Length Typical Roll Width Resin Prepreg Weight Volatile Service Temperature (Cured State) Resin Content PREPREG PROPERTIES TRANSPORT & STORAGE When stored sealed & out of direct sunlight. Please refer to product MSDS for up to date information specific to this product. All prepreg materials should be stored in a...

カタログの2ページ目を開く

LAMINATE PROPERTIES All data presented in this datasheet is based on the mechanical testing of a single batch of material. MECHANICAL PROPERTIES AT ROOM TEMPERATURE (21ºC / 70ºF) PROPERTY TEST STANDARD 0º Interlaminar Tensile Shear Strength ±45º Interlaminar Tensile Shear Strength Glass Transition Temp. (30 mins at 140°C) Glass Transition Temp. (15 mins at 160°C) MECHANICAL PROPERTIES AT 80ºC (176ºF) PROPERTY TEST STANDARD 0º Interlaminar Tensile Shear Strength BURN BEHAVIOUR PROPERTY Flammability vertical, 60s flaming – After flame time Flammability vertical, 60s flaming – After flame time...

カタログの3ページ目を開く

NOTICE All advice, instruction or recommendation is given in good faith but the Company only warrants that advice in writing is given with reasonable skill and care. No further duty or responsibility is accepted by the Company. All advice is given subject to the terms and conditions of sale (the Conditions) which are available on request from the Company or may be viewed at the Company’s Website: www.gurit.com/terms-and-conditions.aspx. The Company strongly recommends that Customers make test panels and conduct appropriate testing of any goods or materials supplied by the Company to ensure...

カタログの4ページ目を開く

PH 840 1 / 4ページ

カタログの抜粋

Guritのすべてのカタログとパンフレット

PH 840
1 / 4ページ