カタログ >
Gurit >
PB1000

PB1000
1 / 4ページ

カタログの抜粋

General Datasheet PB1000 VOLATILE-FREE CURING BENZOXAZINE PREPREG ¬ Volatile-free curing system Economical, fast curing system (10 minutes at 160ºC / 320 ºF) Long shelf and shop life Excellent FST and Heat Release (HR) behaviour, fulfils ABD0031 Optimised surface quality INTRODUCTION PB1000 benzoxazine resin has been developed for the realisation of extremely lightweight composite structures with high specific mechanical properties and high FST requirements. Such composite structures can be exposed easily to temperatures in the range of -55°C up to +80°C (-67 up to 176°F). The prepreg material is suitable for monolithic and sandwich structures: Aviation and aerospace industries Rail ind

カタログの1ページ目を開く

PRODUCT INFORMATION PB1000 benzoxazine prepreg is available in a range of product formats. Please consult your local sales contact for further information. Full contact details can be found at www.gurit.com. PROPERTY TEST STANDARD Resin Flow Fibre Material Fabric Weight Weave Style Resin Prepreg Weight Volatile Service Temperature (Cured State) Resin Content Typical Roll Length Typical Roll Width PREPREG PROPERTIES TRANSPORT & STORAGE When stored sealed & out of direct sunlight. STORAGE TEMP All prepreg materials should be stored in a freezer when not in use to maximise their useable life,...

カタログの2ページ目を開く

LAMINATE PROPERTIES All data presented in this datasheet is based on the mechanical testing of a single batch of material. MECHANICAL PROPERTIES AT ROOM TEMPERATURE (21ºC / 70ºF) PROPERTY TEST STANDARD 0º Interlaminar Tensile Shear Strength 0º Interlaminar Shear Strength Climbing Drum Peel* Bending Load* Glass Transition Temperature *sandwich structure: 2 plies per side; core 3.2-48kg/m³ 9.4mm (honeycomb) MECHANICAL PROPERTIES AT 80ºC (176ºF) PROPERTY TEST STANDARD 0º Interlaminar Tensile Shear Strength 0º Interlaminar Shear Strength BURN BEHAVIOUR PROPERTY Flammability vertical, 60s...

カタログの3ページ目を開く

NOTICE All advice, instruction or recommendation is given in good faith but the Company only warrants that advice in writing is given with reasonable skill and care. No further duty or responsibility is accepted by the Company. All advice is given subject to the terms and conditions of sale (the Conditions) which are available on request from the Company or may be viewed at the Company’s Website: www.gurit.com/terms-and-conditions.aspx. The Company strongly recommends that Customers make test panels and conduct appropriate testing of any goods or materials supplied by the Company to ensure...

カタログの4ページ目を開く

PB1000 1 / 4ページ

カタログの抜粋

Guritのすべてのカタログとパンフレット

PB1000
1 / 4ページ