Pneumatic clutches and brakes - Type FK T
1 / 38ページ

Drum Type pneumatic clutches and brakes type FKT Catalog Nº: FKT Contents General characteristics Element description FKT Element Construction and characteristics Components of the FKT Element Technical and dimensional information Brake and Clutch application Technical and Dimensional Data

This element was specifically constructed and designed to withstand severe brake and clutch applications where large inertia loads and slippage that would normally result in a loss of torque and would significantly reduced operating life. The design and construction of the FKT element is different from the FK and FM, due to the fact that the torque is transmitted by torque bars, and not by the sidewalls of the air tube. The tube is loose and contained within the housing which is formed by a rim and two side plates, which are replaceable. The torque bars are held in position by the side...

1 - Rim 2 - Tube 3 - Elbow assembly 3A- Quick Release Valve - Optional 4 - Compression Ring 5 - Air Connection Tube 6 - Air Connection Gasket 7 - Friction Shoe Assembly 8 - Air Tube Group (dual mounted) 9 - Spacer Group (dual mounted) 10 - Friction Lining & Fasteners 11 - Torque Bar 12 - Release Spring 13 - Side Plate (2 Required) 10, 11, 12 - Friction Shoe Assembly, Torque Bar and Spring Kit. NOTES: The option of quick release valve is not applicable to 11.5-FKT-500. 4

Single FKT - Narrow series Technical data Size 11,5 to 42 * The data displayed in the catalog is current and subject to change without previous notice. NOTES: 1- Refers to basic part number only. When ordering, please indicate the number of air inlets and the type of connection. 2- Dynamic torque is indicated; the static torque is approximately 25% greater. The torque in each application depends upon the air pressure and the speed. 3- Tolerance by size: 11,5 to 20 + 0,000/-0,005 ins. (+0,00/-0,13 mm). 24 to 28 + 0,000/-0,008 ins. (+0,00/-0,20 mm). 33 to 42 + 0,000/-0,010 ins. (+0,00/-0,25...

Single FKT - Narrow series Dimensional data Size 11,5 to 42 D3 * The data displayed in the catalog is current and subject to change without previous notice.

Dual FKT - Narrow series Technical data Size 11,5 to 42 * The data displayed in the catalog is current and subject to change without previous notice. NOTES: 1- Refers to basic part number only. When ordering, please indicate the number of air inlets and the type of connection. 2- Dynamic torque is indicated; the static torque is approximately 25% greater. The torque in each application depends upon the air pressure and the speed. 3- Tolerance by size: 11,5 to 20 + 0,000/-0,005 ins. (+0,00/-0,13 mm). 24 to 28 + 0,000/-0,008 ins. (+0,00/-0,20 mm). 33 to 42 + 0,000/-0,010 ins. (+0,00/-0,25...

Dual FKT - Narrow series Dimensional data Size 11,5 to 42 D2 * The data displayed in the catalog is current and subject to change without previous notice.

Single FKT - Wide series Technical data Size 14 to 66 * The data displayed in the catalog is current and subject to change without previous notice. NOTES: 1- Refers to basic part number only. When ordering, please indicate the number of air inlets and the type of connection. 2- Dynamic torque is indicated; the static torque is approximately 25% greater. The torque in each application depends upon the air pressure and the speed. 3- Tolerance by size: 14 to 20 + 0,000/-0,005 ins. (+0,00/-0,13 mm). 24 to 28 + 0,000/-0,008 ins. (+0,00/-0,20 mm). 32 to 60 + 0,000/-0,010 ins. (+0,00/-0,25 mm). 66...

Single FKT - Wide series Dimensional data Size 14 to 66 Construction for size 66’ only * The data displayed in the catalog is current and subject to change without previous notice.

Dual FKT - Wide series Technical data Size 16 to 66 * The data displayed in the catalog is current and subject to change without previous notice. NOTES: 1- Refers to basic part number only. When ordering, please indicate the number of air inlets and the type of connection. 2- Dynamic torque is indicated; the static torque is approximately 25% greater. The torque in each application depends upon the air pressure and the speed. 3- Tolerance by size: 16 to 20 + 0,000/-0,005 ins. (+0,00/-0,13 mm). 24 to 28 + 0,000/-0,008 ins. (+0,00/-0,20 mm). 32 to 60 + 0,000/-0,010 ins. (+0,00/-0,25 mm). 66 +...

Dual FKT - Wide series Dimensional data Size 16 to 66 Construction for size 66’ only * The data displayed in the catalog is current and subject to change without previous notice. 12

FKT Clutch application Ventilated adapter arrangement - Technical * The data displayed in the catalog is current and subject to change without previous notice. NOTES: 1- Request by part number. Rotorseal and hose are not included. 2- The torque indicated is dynamic; the static torque is approximately 25% greater. The torque in each application depends upon the air pressure and the speed. 3- Weight referred to minimum Ø of shaft. Rotorseal and hose are not included. 4- NPT thread 5- Refer to Rotorseal section of technical catalog for assembly and dimensional information 6- Weight referred to...

FKT Clutch application Ventilated adapter arrangement - Dimensional data Ventilated Adapter Shafts and keys by customer D38 CG Element Ventilated Adapter & Hub 3 * The data displayed in the catalog is current and subject to change without previous notice.

FKT Clutch application Ventilated adapter arrangement - Technical Dual Narrow series 11,5 to 42 * The data displayed in the catalog is current and subject to change without previous notice. NOTES: 1- Request by part number. Rotorseal and hose are not included. 2- The torque indicated is dynamic; the static torque is approximately 25% greater. The torque in each application depends upon the air pressure and the speed. 3- Weight referred to minimum Ø of shaft. Rotorseal and hose are not included. 4- NPT thread 5- Refer to Rotorseal section of technical catalog for assembly and dimensional...

FKT Clutch application Ventilated adapter arrangement - Dimensional data Dual Narrow series 11,5 to 42 Shafts and keys by customer Ventilated adapter * The data displayed in the catalog is current and subject to change without previous notice.