カタログ >
GROUPE SOROMAP >
THICK PRIMER

THICK PRIMER
1 / 1ページ

カタログの抜粋

DATA SHEET THICK GLYCEROPHTALIC FILLER TO BE APPLIED WITH A KNIFE PREPARATION OF THE SURFACE The THICK FILLER is to be applied to clean, dry, slightly absorbent surfaces. On new wood, stripped and/or wood which is too porous, soak beforehand with wood primer PB10. APPLICATION Mix well the product before use. After applying the undercoat PB10 spread the THICK FILLER with a wide-bladed knife and smooth down. Repeat if necessary after 1 hour 30 minutes drying at 20°C then leave to harden. Sand down dry or with water, SL1 should be applied in two coats. The first coat of SL1 must be diluted. PRECAUTIONS FOR USE Use protective gloves, masks and clothes. Work in a ventilated area, an accumulation of solvents can catch fire if exposed to a naked flame or a spark. Keep away from all sources of ignition. Do not smoke. In case of insufficient ventilation, wear a appropriate respiratory apparatus. HEALTH AND SAFETY See data sheet This information corresponds to the actual state of our knowledge and has the sole object of informing you about our products and possible applications. It is objectively given but does not imply any guarantee by us. Our company may modify all these details at any time SOROMAP PEINTURE VERNIS ZA de Beligon – 1 Rue Maurice Mallet 17300 ROCHEFORT S/MER Tél : 05 46 88 36 13 • Fax : 05 46 88 36 25 • Email : william.thomas@soromap

カタログの1ページ目を開く