カタログの抜粋
200-Series Centrifugal Booster PumpsInstallation, Operation, and Maintenance_ The Concept: GRoco 200-Series booster Pumps are high capacity (up to 17 GPM) long-life pumps designed for use in hot or cold water circulating systems. Installation: install your 200 series pump in any position, horizontal or vertical. 200 series pumps are not self-priming, so installation must be in a location that assures that the pump will have a flooded inlet at all times. Fasten the pump securely to the selected mount surface with four (4) screws through the grommets on the pump base plate. Electrical Connection: Proper wire size selection is essential for proper pump performance and motor life. consult GRoco Pumps Service department for assistance. connect the orange wire to dc (+) and the black wire to Dc (-) power. Protect the pump with a dedicated 10-amp circuit breaker. Maintenance: Periodically inspect the pump for signs of leakage. if leakage is detected install service kit #P-2. Plumbing Connection: 200 series pumps are intended for use with 1” iD hose. Double-clamp all hose connections. © 1999 GROSS MECHANiCAL LABORATORiES, INC. ALL RiGHTS RESERVED. For service assistance/information call 410.604.3800 and ask for Pumps Service Department. After hours, go to www.groco.net.
カタログの1ページ目を開くGrocoのすべてのカタログとパンフレット
-
Thermopure-26 ページ
-
CP-20-S SERIES1 ページ
-
CP-20-BB, BBC, BBWA1 ページ
-
G SERIES2 ページ
-
GP SERIES1 ページ
-
AS-100 SERIES1 ページ
-
PSR SERIES2 ページ
-
PSR AC1 ページ
-
PARAGON JR SEREIS2 ページ
-
PARAGON JR-B SERIES2 ページ
-
C-60/80 SERIES1 ページ
-
K SERIES1 ページ
-
HF SERIES1 ページ
-
THERMOPURE SERIES6 ページ
-
ZDS WASTE SERIES1 ページ
-
TLM SERIES1 ページ
-
155 SERIES1 ページ
-
SWEET TANK SERIES2 ページ
-
VL-1504 REPAIR1 ページ
-
HVL SERIES1 ページ
-
2016 GROCO CATALOG58 ページ
