カタログ >
Graco >
filtration brochure

filtration brochure
1 / 4ページ

カタログの抜粋

Filter Applications Equipment Solutions for Filter Manufacturing On-ratio adhesive dispensing – for less waste and more uptime • Reliable dispensing equipment for end cap molding, sealing and media bonding • Ratio assurance results in less material waste, higher yield, reduced scrap and more process confidence • Easy to program and store multiple shot sizes and sequences • Accurate, repeatable shot and bead dispensing • Wide ratio range – 1:1 to 32:1 – lets you switch materials and maintain ratio • USB interface lets you download process data onto a flash drive to verify the material was dispensed accurately and on-ratio

カタログの1ページ目を開く

Increase Process Confidence with On-Ratio Dispens Reduce scrap and material waste When you’re using plural-component materials for bonding and sealing filters, ratio accuracy is a critical part of the manufacturing process. Without proper ratio assurance, you face the expense of wasted material, scrapped parts and re-work, increased operating costs and reduced profitability. Graco equipment for filter bonding applications is designed for accurate, on-ratio dispensing. With a pressure transducer option, you have the assurance and peace of mind that your material is dispensed properly and...

カタログの2ページ目を開く

sing Solutions from Graco Graco HFR Metering System With the Graco HFR Metering System, you accurately hit a specific ratio and volume – first time, every time. Ideal for low- to high-viscosity compounds, this hydraulic, fixed ratio metering system is advanced and reliable, yet affordable. • Flexible shot size range – well suited for larger shot sizes (10 cc’s and above) • Offers continuous flow bead dispensing (manual or automated) • Provides a fixed ratio range of 1:1 to 32:1 Graco PR70 Meter, Mix and Dispense System The Graco PR70 is a pneumatic system that accurately meters, mixes and...

カタログの3ページ目を開く

Technical Specifications Everything you need to make an informed decision Materials for filter applications Polyurethanes, epoxies and silicones Polyurethanes, epoxies and silicones Dimensions PR70 with 7.5 L on-board tanks: 15.5W x 38.2H x 30.6D in (39 x 97 x 78 cm) PR70 with 60 L off-board tanks: 32.1W x 64.9H x 29.3D in (39 x 97 x 78 cm) Ratio range Ratio tolerance range Max flow rate – viscosity dependent Shot size range 10 cc’s and above, continuous flow Maximum fluid working pressure Fluid viscosity range < 10 SCFM typical (varies with cycle time) < 1 scfm of air to cycle MD2 Valve...

カタログの4ページ目を開く