GSi 8.5 K - 9.6 K
1 / 4ページ

Easy installation The intercooler W/A assures the perfect functioning of the generator independently from the external environment temperature, therefore the alternator and the engine will work at ideal temperature optimizing the performance and reliability of the genset. The generator may be installed in any room on the vessel without the need of ventilation blowers. Extremely compact and quiet, the generator is equipped with a double shock absorbing system to increase comfort: the first one absorbs vibrations from engine-alternator to the frame, the second one absorbs residual micro-vibrations from frame to vessel. Via Stazione 5 - 27030 Villanova d’Ardenghi (PV) - Italy Phone:+39-0382-5091 commerciale@genset.it www.genset.it Last update date 08/09/23 In line with our research and development policy, we reserve the right to update, modify or replace information and images without prior notice.

STANDARD EQUIPMENT Control panel _Easy maintenance access to the feeding and lubrification systems, the sea/water pump and the air filter _Double vibration dumping system _ Emergency stop button _ Magneto-thermal protection _ CBU EVO IL4 device controls and drives the genset. The large display and control pushbuttons allow easy use and monitoring: • Manual start • Voltage Vac • Frequency Hz • Hour meter • Genset battery voltage • Oil low pressure alarm • Engine preheating • Engine high temperature alarm • Alternator battery charger failure alarm • Protection alarm for frequency and rpm •...

The power is referred to a sea water temperature up to 31°, an atmosferic pressure of 100 KPa and a humidity percentage of 30%

1. Remote control panel with 20 mt cable for Comap