カタログ >
Gems Sensors >
D-Cryo Series Solenoid Valve

D-Cryo Series Solenoid Valve
1 / 2ページ

カタログの抜粋

D-Cryo Series  MOPD: 1000 PSI (69 Bar)  CV Range: 0.040 to 0.770 (KV Range: 0.034 to 0.655)  15 Watts The D-Cryo Series is a 2-way, high flow, miniature Cryogenic valve designed and built for service down to –320°F (-196°C). Depending on your temperature requirements, the D-Cryo Series can be configured for liquid nitrogen (LN2), liquid carbon dioxide (LCO2), and other extreme temperature media. PTFE coated plungers, 316 Stainless Steel guide tubes and plunger springs, encapsulated coils, and PTFE or Rulon® seat seals produce a truly robust Cryogenic valve for applications requiring high cycle life and media temperature control. Typical Applications • Environmental Chambers • Food Processing • Laser Surgical Equipment • Semiconductor Manufacturing BODY PORTS 1/4-18 NPT (2) PLC’S BODY PORTS 1/4-18 NPT (2) PLC'S 0.34 (8.6) 1.51 (38.3) CONDUIT (FILLED w/ EPOXY) 1.51 (38.3) CONDUIT (FILLED w/EPOXY) SOLENOID VALVES Use the Bold characters from the choices listed on the following page to construct a product code. Plunger Seal Material* Body Material* O-Ring Material* Body Port Configuration * Blank entry indicates a "Standard" selection (303 Stainless Steel, Rulon® and Variseal®, in this case). Example: D2062-LN2-LT-12VDC 2-Way N.C. Liquid Nitrogen Class-H Encapsulated Coil with lead-wires, conduit filled housing solenoid valve, with 303 stainless steel body, Rulon® plunger seal, Variseal® o-ring, 1/8-28 BSPT female thread, operating at 12 DC with rectified coil. Visit www.GemsSensors.com for most current i

カタログの1ページ目を開く

Part Prefix Table 1 1 Primary Prefix 2 Model -LN2 = Liquid Nitrogen model -LCO2 = Liquid Carbon Dioxide model 3 Body Material LN2 Only_ (blank) = 303 Stainless Steel12 4 Plunger Seal Material LN2 Only_ (blank) = Rulon®2 5 O-Ring Material LN2 Only_ (blank) = Variseal® (PTFE material with internal spring)2 6 Body Port Configuration LN2 Only_ (blank) = 1/4-18 NPT female thread2 lC = 1/8-27 NPT female thread LT = 1/8-28 BSPT female thread LU = 1/4-19 BSPT female thread BI = Bottom over-seat port, female thread BO = Bottom under-seat port, female thread 7 Voltage LN2 Only_ _VDC = DC (specify...

カタログの2ページ目を開く