カタログ >
Gems Sensors >
BS Series Solenoid Valve

BS Series Solenoid Valve
1 / 2ページ

カタログの抜粋

BS Series – Higher Flow  MOPD: 150 PSI (Plastic Body) or 150 PSI (Metal Body)  CV Range: 0.035 to 0.300  4.5 Watts (Plastic Body) or 7 Watts (Metal Body) The BS Series is a 2-way, high flow, isolation valve that is designed to be virtually impervious to chemical attack and to protect high purity media. When your media cannot come in contact with any metallic materials, this highly versatile, modular valve delivers the protection you need for accurate and reliable flow control for millions of cycles. With a variety of body, and diaphragm materials, plus numerous port configurations, voltage options, and coil constructions, the BS Series is truly a miniature inert isolation valve that can be built to your exact applications requirements. Typical Applications • Remediation Equipment • Clinical Chemistry Equipment • Analytical Instrumentation Dimensions Threaded Port Body Manifold Mount Body ø1.22 MANIFOLD MATING DIMENSIONS Ø.125 SPANNER HOLES, (4) HOLES EQUALLY SPACED 0.80 BODY PORTS 1/8-27 NPT (2) PLC’S Use the Bold characters from the choices listed on the following page to construct a product code. SOLENOID VALVES Diaphragm Seal Material Body Material* Body Port Configuration* Additional Options* * Blank entry indicates a "Standard" selection (1/8-27NPT female thread, in this case). Example: BS2035-W25-E-28VDC 2-Way N.C. Polypropylene (grommet housing, 1/8-27 NPT female thread only) solenoid valve, with 25˝ tape-wrapped coil, lead-wires, non-standard length, EPR diaphragm seal, 1/8-27 NPT female thread, operating at 28 VDC. Alternate 1/2" Conduit Housing Available on all body configurations 1.26 CONDUIT OPTION (1/2-14 NPSM) Primary Prefix “IN” (UNDERSEAT) #8-32 UNC-2B x 0.25 MIN. FULL TH’D ON A ø.735 B.C. (2) PLC’S

カタログの1ページ目を開く

* Other body orifice sizes may be available, consult factory. 6 Voltage _VDC = DC (specify voltage) _VAC = AC Rectified only (specify voltage) 7 Additional Options WM = Mounting bracket OC = Cleaned for oxygen use * Standard selection; will be used unless otherwise specified. Standard selections are not referenced in final part number. Notes 1. Use Prefixes from these rows if you want to use any of the other Body Materials listed under selection 3 . Simply add the respective material code in the 3rd part number position (See Example). 2. Not available with Polypropylene bodies. f Teflon®...

カタログの2ページ目を開く

BS Series Solenoid Valve 1 / 2ページ

カタログの抜粋

Gems Sensorsのすべてのカタログとパンフレット

BS Series Solenoid Valve
1 / 2ページ