カタログ >
FLIR Systems, Inc. >
FLIR Agentase C2 TM

FLIR Agentase C2 TM
1 / 2ページ

カタログの抜粋

The FLIR Agentase C2 agent disclosure spray is the most sensitive point detector for chemical nerve agents (G- & V-series) and sulfur mustard (HD). It uses colorimetric technology to reveal the exact location of Chemical Warfare Agent (CWA) contamination on a surface at sub-microgram (trace) levels within five minutes. Once applied to a surface, the standard aqueous spray changes color from yellow to red to indicate the presence of a CWA threat. The color change reveals the exact location of the agent contamination, making the invisible threat visible. An optional fluorescent additive enhances the visual response when used with an ultraviolet (UV) light in poor lighting conditions. The forensic spray is translucent yet allows the threat to be seen under UV-light, a critical feature for covert operations. During the early stages of consequence management, Agentase C2 can be used to detect trace-level contamination before long-term exposure causes harm or loss of life. As part of the decontamination process, it reveals specific hot spots, enabling users to focus and reduce the amount of decontaminant used, lowering costs up to five-fold. www.flir.com/agentaseC2 MOST SENSITIVE CHEMICAL POINT DETECTOR AVAILABLE COMPLEMENTS OTHER CHEMICAL SENSING TECHNOLOGIES • Reveals exact location of agent on surfaces using enzyme-based colorimetric technology • Complements electronic sensors by providing the ability to map chemical agent contamination for emergency response missions, as well as aid in the decontamination of personnel or equipment after exposure to CWAs • Detects sub-microgram levels of chemical nerve agents (G- & V-series) and sulfur mustard (HD) within five minutes • Yellow color on a surface indicates the absence of chemical agents; red color on a surface indicates the presence of a CWA threat • Detects trace-level contamination, allowing for early deployment of counter measures and evacuation before long-term exposure causes harm or loss of life • Non-destructive spray allows for sample extraction and analysis via GC/MS during forensic investigations MULTI-PURPOSE AND EASY TO USE • Two applicator sizes tailored to mission requirements • Optional forensic spray is translucent to be seen with UV-light for covert missions • Optional fluorescent additive enables it to be seen with UV-light in challenging light conditions • Optional cold weather additive expands the mission into colder environments • Training completed in

カタログの1ページ目を開く

Sample Introduction Spray directly onto surface Sample Phase Surface-based detection Enzyme formulations include: nerve agent (V- & G-series) and blister agent (HD); training disclosure spray also available Handheld Applicator Weight (Full) Sampling & Analysis Physical Features Spray Volume Surface Coverage Setup Time System Interface Sampling & Analysis Detection within 5 mins Display & Alerts Colorimetric sensor response; Standard nerve agent and training spray is yellow when applied to a surface and surface changes to red within 5 mins if contaminated; blister agent spray is applied red...

カタログの2ページ目を開く