toolingmix
1 / 4ページ

Metering Technology DOPAG Metering and Mixing System Hilger u. Kern / Dopag Group

TOOLING-MIX for pasty media The TOOLING-MIX has been specifically designed for handling pasty two component media, including polyurethanes and epoxy resins, as well as for successfully processing microball filled • lower material degradation than similar systems due to the optimised construction of the gear pumps • careful construction for gentle material feeding minimum maintenance required, due to just a single pump for each component Typical Applications Rapid Prototyping • Gentle material feeding • Lower material degradation due • Continuous flow dispensing • Simple operation • Over...

The components are fed and metered directly from the drums. The gear pumps are mounted directly onto the follower plates. Each gear pump is individually controlled and protected against over pressure. The TOOLING-MIX is controlled by a metering Technical Data Flow rate Mixing ratio Maximum working pressure Mixing system Material supply Viscosity range Material characteristics Power supply Maximum air inlet pressure Both components are then kept separate until they enter the static mixer where they are mixed After use, the static mixer is normally purged with oversized rams Gear pump...

Hilger u. Kern / Dopag Group Germany Hilger u. Kern GmbH Industrietechnik Käfertaler Straße 253 68167 Mannheim Switzerland DOPAG Dosiertechnik und Pneumatik AG Langackerstrasse 25 6330 Cham The Hilger u. Kern / Dopag Group, with more than 300 employees, +49 621 3705-0 +49 621 3705-200 info@hilger-kern.de www.hilger-kern.com +41 41 7855-757 +41 41 7855-700 info@dopag.ch www.dopag.com polymers and single component media such as greases, oils and pastes. Vertriebsbüro Mitte 1 68167 Mannheim +49 171 8087282 VBMitte@hilger-kern.de Denmark DOPAG SCAN ApS Roskilde +45 45 828090 info@dopag.dk...