カタログ >
Böning Automationstechnologie GmbH & Co. KG >
AHD-DPS02 System

AHD-DPS02 System
1 / 8ページ

カタログの抜粋

AHD-DPS02 System Navigation and Signal Lights Control and Monitoring System Control Panel (customized “large”) Color display with individual graphics and touch screen Extension module for 7 lights Control Panel (standard “square”) Basic module for 14 lights • Modular control and monitoring of up to 42 lamp circuits per system • Conventional or LED lamps can be monitored (24V, 115V, 230V) • Self-resetting overload protection on both output terminals • Operation via customizable control panel, touch screen or standard PC • Approvals: BV, CRS, DNV, LR, PRS, RS (further approvals on demand)

カタログの1ページ目を開く

Simple operation & safe detection The AHD-DPS02 system is used for controlling and monitoring position and signal lights on ships. Since these lamps serve safety-critical functions, the control and monitoring system used must comply with certain prescribed criteria. In addition to the possibility of dual power supply (primary and emergency), a direct connection must be available so that all position and signal lights can be controlled even in the event of a failure of the electronics. Furthermore, for the control of LED lights, an operating hour monitoring is required for each lamp. The...

カタログの2ページ目を開く

Safe supply External interfaces The basic module AHD-DPS02 G14 is available in several device variants for different lamp voltages (24 VDC, 115 VAC, and 230 VAC). It is equipped with two power supplies (main and emergency supply). Switching between them is possible in case of a power supply failure to maintain the system's functionality. Both voltages are continuously monitored and alerted in case of a failure. Upon request, the basic module AHD-DPS02 G14 can be extended with an interface module. This module is directly plugged into the board and allows for the connection of external...

カタログの3ページ目を開く

AHD-DPS02 A07 Position lantern monitoring – extension module with 7 lamp channels 6 types for 24VDC, 115VAC, 230VAC (each bulb / incandescent or LED lamp) AHD-DPS02 E14 Switch module for Basic module AHD-DPS02 G14 Direct control of lamp channels, works as emergency control also in case of failure of electronics. The module is directly connected to the expansion module via ribbon cable. Part-No. Switch module E14: 14549 Switch module for extension module AHD-DPS02 A07 Direct control of lamp channels, works as emergency control also in case of failure of electronics. The module is directly...

カタログの4ページ目を開く

Control panel AHD-DPS02 BS (Custom Design) Small control panel for control and monitoring of up to 28 lamp channels: Lamp control and display of error messages in case of failure or end of life (LED). The module is directly connected to the basic module AHD-DPS02 G14 via ribbon cable. Part-No. Control panel BS „square“ 150 x 150mm: 10945Vx Medium-sized control panel for controlling and monitoring up to 28 lamp channels: Part-No. Control panel BS „medium“ 198x 150mm 22723

カタログの5ページ目を開く

Large control panel for controlling and monitoring up to 42 lamp channels: Part-No. Control panel BS „large“ 294 x 150mm 11061Vx (horizontal mounting) 150 x 294mm 11060Vx (vertikal mounting) Control panel AHD-DPS02 B14…B42 (standard design) Standard control panel for control and monitoring of up 42 channels: Lamp control and display of error messages in case of failure or end of of life (LED). The module is directly connected via ribbon cable to the basic module AHD-DPS02 G14. Standard control panel B14 14 Switch B21 21 Switch B28 28 Switch B35 35 Switch B42 35 Switch AHD-DPS02 GC Expansion...

カタログの6ページ目を開く

Application AHD-DPS02 G14 with extension module and control panel

カタログの7ページ目を開く

Technical Data AHD-DPS02 G14 Power supply (electronic unit) Power supply (elektronic unit) (Flat ribbon cable) Current consumption Current consumption Light Power Operating temperature Storage temperature Operating temperature Storage temperature External dimensions External dimensions switched and protected 2 x communication bus internal (operating unit, extens. module) 1 x communication bus internal (basic or extension module 1 x CAN bus 3 x Output (Relay contact, max. switching voltage 32 VDC) Option (with AHD-DPS02 GC): Modbus RS485/422/CAN Mounting via AHD-DPS02 G14 (Flat ribbon cable)...

カタログの8ページ目を開く