カタログ >
Anschuetz >
Steering Control System

Steering Control System
1 / 12ページ

カタログの抜粋

R Anschütz Steering Control System NautoSteer®

R Anschütz Steering Control System The variety of devices required for navigation and monitoring in the bridge area necessitates a functional design meeting work sequence-oriented and ergonomic demands. In 1969, Anschütz introduced our first modular steering control equipment. Today, approximately 15,000 ships all over the world use Raytheon Anschütz steering control systems. The knowledge gained over this time leading, and the system atic development of these devices using progressively more advanced technology, have resulted in today’s NautoSteer® product range. All requirements for...

カタログの2ページ目を開く

Dual Follow-Up Control 1 24VDC In case of dual follow-up steering control two follow-up amplifiers are required. This ensures a separated control path for each valve/pump of the steering gear. The advantage of follow-up steering control is that the rudder angle is shown directly at the handwheel and that it works as a closed loop system meaning that a rudder drift is compensated by the system automatically. The required rudder angle is set at the handwheel. The follow-up amplifier compares the actual rudder information from the feedback unit with the set rudder information from the...

カタログの3ページ目を開く

R Anschütz Steering Stand ComPilot® 20 The unique design of the ComPilot® 20 steering stand is suitable for free-standing arrangements as well as space-saving integra tion between desk segments. Standard colour casing: grey, structure paint. The modular navigation hardware design permits functional and economical adaptation to any applicable specification. ComPilot® 20 is completely wired and tested according to customer specification. This allows a fast, simple and cost efficient installation on board as only the connection to the board cabling has to be done. Sample configuration with...

カタログの4ページ目を開く

Follow-Up, Non-Follow Up Control Components Rudder Angle Indicators A rudder angle indicator system consists of a feedback unit, a rudder angle amplifier and rudder angle indicators. Follow-up handwheel unit Three-face rudder angle indicator ceiling mounting Feedback unit Rudder angle indicator, wall mounting with dimmer Steering mode selector switch Rudder angle indicator with dimmer, according to Panama Canal rules Follow-up amplifier incl. casing Follow-up tiller Non-follow-up bus tiller Non-follow-up tiller Rudder angle indicator, flush mounting

カタログの5ページ目を開く

R Anschütz System extensions Take-over A take-over system enables to take-over the steering control from one steering position (e.g. main steering stand) to another (e.g. wing). Monitoring system The steering failure alarm offers online monitoring from the follow-up steering control system and provides an alarm if the rudder does not follow the rudder order. Alarm system Up to 15 alarm and status indications of the steering control and the steering gear system can be configured on the Anschütz Nauto-Alarm. As an option, NautoAlarm offers an external alarm output for each of the 15...

カタログの6ページ目を開く

Autopilot NautoPilot® NP 20X5 NautoPilot® NP 20x5 is Raytheon Anschütz’ professional autopilot series for all commercial ships of 100 m length and above. It is characterized by the most advanced steering algorithms that ensure accurate steering with fewest rudder actions to keep the ship on a preset heading. NautoPilot® 2015 Quick Tune: 6 different parameter sets for preselection of rudder, counter rudder and yawing for fast adaptation to current sea-state. It fulfils the requirements for a track control system, Category B, in combination with Raytheon Anschütz ECDIS. NautoPilot® 2025...

カタログの7ページ目を開く

R Anschütz Desk Mounting Frames Raytheon Anschütz provides various mounting frames to simplify the installation on board. These mounting frames can be fitted with all required components according to customer specification and can be supplied completely wired and tested. In this case only the connection to the board cabling has to be done. 326 (12.83") 5x3 520 (20.47") 4x1 134 (5.28") 6x3 362 (14.25") 424 (16.69") 230 (9.06") 4x2 612 (24.10") 424 (16.69") 6x4 326 (12.83") 424 (16.69") 4x3 424 (16.69") 616 (24.25")

カタログの8ページ目を開く

Modular Navigation Hardware Anschütz products are designed and manufactured in accordance with DIN 43700. The modular construction allows simple installation on ships of any size and any type. Systems can be customized for the bridge workplace according to the individual ship´s requirements. Various types of enclosures are available for any shipboard location IP23 desk mounting (standard) bridge steering stand casing bulkhead mounting IP44 casing steering gear compartment IP56 deskmounting casing We offer you a modular hardware system composed of the highest-quality navigation devices....

カタログの9ページ目を開く

R Anschütz Modular Navigation Hardware 192 x 192 (7.56" x 7.56") 288 x 144 (11.34" x 5.67") 192 x 96 (7.56" x 3.78") NautoPilot® NP60 102-881 Pilotstar D 102-864 Operator unit NP 20x5 series DIG. NAVIGATION DATA INDICATOR DIG. NAVIGATION DATA INDICATOR DIG. NAVIGATION DATA INDICATOR DIG. NAVIGATION DATA INDICATOR 96 x 96 (3.78" x 3.78") Change-over switch Gyro/Magn. or Gyro 1/Gyro 2 124-167 Change-over switch 124-183 192 x 96 (7.56" x 3.78") Override signal unit 135-077 Watch-alarm-reset key 135-096 Dimmer 148-380 Rudder midship indicator 148-468 96 x 192 (3.78" x 7.56") Steering mode...

カタログの10ページ目を開く

192 x 96 (7.56" x 3.78") DIG. NAVIGATION DATA INDICATOR DIG. NAVIGATION DATA INDICATOR Operator unit Standard 22 130-613 Nav Data Repeater NDR 133-812 Digital repeater 133-811 DIG. NAVIGATION DATA INDICATOR Universal signal device NautoAlarm 135-097 Steering failure alarm unit 135-081 DIG. NAVIGATION DATA INDICATOR DIG. NAVIGATION DATA INDICATOR Conning alarm panel 136-109 Rudder limit 105-108 96 x 96 (3.78" x 3.78") 192 x 192 (7.56" x 7.56") Rate-of-Turn indicator NB 09-066-027 Steering repeater compass 133-560 INDICATION UNIT ROT RoT Indicator/control unit 430-009 Rudder angle indicator...

カタログの11ページ目を開く