カタログ >
Anschuetz >
Standard 22 NX

Standard 22 NX
1 / 4ページ

カタログの抜粋

The world's most popular gyro compass Standard 22 NX is the new Anschutz gyro compass, designed for high accuracy, reliability and operational safety even under harshest environmental conditions and in high latitudes. The upmost in reliability Standard 22 NX uses unique and superior sensor technology, proven over 15 years in more than 20,000 installations. • Inductive and optical data transmission, no slip rings that are subject to wear • Unique resistant design reduces environmental influence (i.e. shocks, vibrations) • Reliability and best accuracy of heading information under any...

カタログの2ページ目を開く

In a heading management system, up to three Standard (compliant to demanding class notations such as DNV 22 NX or any combination with Standard 30 MF can be NAUT-OSV/OC/AW, LR IBS or ABS NIBS). Heading man- connected plus an additional magnetic compass - where agement systems not only add safety but also additional required also with full redundancy in distribution features that make the day-to-day w°rk easier. Operator unit • Heading monitor, with manual or automatic switch over of gyro compasses • Automatic correction of magnetic heading by deviation and variation (with appropriate GNSS...

カタログの3ページ目を開く

• Settle point error 0.1°secLat., RMS (periodic roll and pitch+horizontal acceleration) secLat.=1/cosLatitude • Rate of turn 0.5°/min plus 5% of the indicated rate of turn Supply voltage & power consumption • 80 W to 140 W (start-up) sensor unit • 36 W distribution unit / 6 W operator unit / 7 W per analogue repeater Signal outputs 1 analog output +/-10V DC for rate-of-turn for 30°/min, 100°/min or 300°/min 2 Ethernet interfaces (teaming mode) With distribution unit additionally • 12x RS 422 individually configurable as course bus or NMEA • 1 analog output +/-10V DC for rate-of-turn for...

カタログの4ページ目を開く