カタログ >
Alfa Laval Mid Europe >
Eliminator CCU

Eliminator CCU
1 / 4ページ

カタログの抜粋

Eliminator – CCU Combined cleaning unit for lube oil treatment The Eliminator. The Eliminator is an optimized lube oil treatment solution, combining two high performance Alfa Laval technologies: Both components can be built into the same housing (Eliminator patented by Alfa Laval) or installed separately but operating in combination. For example: • Full-flow automatic filter for collecting abrasive particles. • Mounted directly on the engine (for high speed engines), the housing being specifically designed for the engine block, and the unit promoted with the engine by the engine manufacturer. • High efficiency disc stack centrifuge removing particles from the backflush oil before returning to sump. • Remote mounted apart from the engine by means of flexible or rigid connexions. • The filter and centrifuge installed as separate components for larger installations or where the flow-rates are higher, and connected by suitable pipework.

カタログの1ページ目を開く

• Eliminates full-flow and bypass cartridge filters, and all the costs associated with the cartridge filters: purchasing, transport, handling, stocking, administration, oil losses, disposal of used cartridges. • Increased engine availibility - no engine stop for filter cartridge • No filter bypass - the engine has 100% protection. In case of failure of one engine component, the remain- ing engine parts are protected from any resulting contamination returning through the LO system, by the full flow filter. Sealed lube oil circuit - the lube oil circuit remains sealed: no risk of...

カタログの2ページ目を開く

Full-flow automatic filter (A) The automatic filter is made up of a number of filter disc elements, each element composed of two identical halves. The number of elements required is defined to meet each The stainless steel filtering mesh is contained inside two supporting mesh, giving an element with a long operating life-time. This is one key part to the low life-cycle cost of the unit. The rigid frame of each element is made in die-cast aluminium. This frame has a number of radial ribs separating each element into 8 or 12 sectors depending on the element size. The oil passes through the...

カタログの3ページ目を開く

Height Option: Eliminator with clutchable centrifuge, allowing cleaning or replacement of the centrifuge, without stopping the engine. Leng th th id W Technical data Product range Model 180-14 180-20 240-12 240-18 240-24 240-30 240-36 Q m3/h to 30 to 35 to 45 to 65 to 85 to 90 to 90 L × W × H (mm) 884 × 252 × 393 956 × 252 × 393 904 × 340 × 422 988 × 340 × 422 1072 × 340 × 422 1156 × 340 × 422 1240 × 340 × 422 Applications Products suitable for lube oil treatment for engines burning HFO, DO, distillate or gas fuels. Suitable for retro-fit installation. Technical documentation Complete...

カタログの4ページ目を開く