Deckhouse for Alfa Laval PureBallast 3 Ex
1 / 2ページ

{{requestButtons}}

カタログの抜粋

Deckhouse for Alfa Laval PureBallast 3 Ex - 1

Alfa Laval has developed standard deckhouses to fit Alfa Laval PureBallast 3 Ex ballast water treatment systems. Each deckhouse is delivered as a pre-assembled solution, including the PureBallast 3 Ex system and all piping inside the deckhouse, for easy integration into the vessel. For PureBallast 3 Ex system details, please refer to the Alfa Laval PureBallast 3 product leaflet. Application A large portion of the world’s tanker fleet uses submersible pumps, e.g. Framo pumps or the equivalent, to eliminate the need for a pump room and maximize space for the transport of product. This poses challenges when installing a ballast water treatment system, as it means there is no internal space available. A deckhouse for PureBallast 3 Ex offers a solution when the pump room is lacking or offers too little space for the installation. Benefits • Pre-assembled PureBallast 3 Ex system in standardized deckhouse • Durable construction with marine-approved steel (Grade A with 3.2 certificates) • Climate regulation through integrated HVAC • DNV-GL type approval covering both deckhouse and treatment system • Possibility to transport the deckhouse in a pallet-wide high cube container (40’/20’/10’) • Full backing from Alfa Laval’s global service organization Configuration The flow-related components of the PureBallast 3 Ex system (UV reactor, filter and CIP unit) are contained within the deckhouse, while the lamp drive cabinet and control cabinet are installed outside the deckhouse and within the vessel’s safe zone. Safety classification All components and wiring inside the deckhouse are classified for use in hazardous areas in accordance with the IEC 60079 series of standards: • Zone 1 • Explosion group IIC • Temperature class T4 (135°) Type approval The standard deckhouse configuration, including the PureBallast 3 Ex system, is type approved by DNV

カタログの1ページ目を開く
Deckhouse for Alfa Laval PureBallast 3 Ex - 2

Deckhouse construction Side, front and aft: 8 mm coated steel, Grade A with 3.2 certificates Top and bottom: 5 mm coated steel, Grade A with 3.2 certificates Insulation: 50 mm, walls and ceiling Scope The standard deckhouse scope of supply includes the following: • Deckhouse HVAC - Electrically driven ventilation fan - Heater • Exterior lighting - Waterproof, seawater-resistant marine-type lamps • Interior lighting - 230 V fluorescent lamps with Ex approval - 24 V emergency lights integrated into the standard lamp units • Fire detection installation - System of heat and smoke detectors...

カタログの2ページ目を開く

Alfa Laval Mid Europeのすべてのカタログとパンフレット

  1. i-40D

    4 ページ

  2. PureBilge

    20 ページ

  3. Eliminator – CCU

    4 ページ

  4. Vibration dampers

    2 ページ

  5. F-152

    4 ページ

  6. AlfaBlue Junior DG

    16 ページ

  7. EPC 60 Retrofit

    2 ページ

  8. Always a step ahead

    12 ページ

  9. PureNOx Prime

    4 ページ

  10. LPG carriers

    2 ページ

  11. LNG carriers

    2 ページ

  12. PureNOx

    2 ページ

  13. Marine Essentials

    100 ページ

  14. Fincoil Solar Max

    10 ページ

  15. Aalborg TFO

    10 ページ

  16. Aalborg OC

    2 ページ

  17. Aalborg D

    2 ページ

  18. Aalborg KBE

    2 ページ

  19. Compabloc

    4 ページ

  20. AlfaBlue BXM/BXD

    2 ページ

  21. Alfa-V ACV

    2 ページ

  22. PureSOx

    16 ページ

  23. PureDry

    4 ページ

  24. PureBallast 3.0

    6 ページ

  25. Heating Insulation

    2 ページ

  26. CB100 / CBH100

    2 ページ

  27. Alfa Laval AOT 3F

    2 ページ

  28. AlfaRex - TM20

    2 ページ

  29. AlfaDisc

    2 ページ

  30. AlfaCond range

    2 ページ

  31. Eliminator CCU

    4 ページ

  32. MIB 303

    4 ページ

  33. EMD00062EN Emmie

    2 ページ

  34. PureBilge system

    38 ページ

  35. Here30_ENG.pdf

    36 ページ

カタログアーカイブ