カタログ >
Airmar >
Pocket/Keel Mount

Pocket/Keel Mount
1 / 6ページ

カタログの抜粋

POCKET/KEEL MOUNT Pocket/Keel Chirp Transducers Unlock the true potential of your fishfinder with the superior quality and performance of an AIRMAR Chirp-ready transducer. PM411LWM screenshot courtesy of Garmin The Benefits of AIRMAR’s Chirp-ready Transducers Benefits of Pocket Mount Transducers • One broadband transducer covers up to 117 kHz of A popular choice for boat builders, pocket mount transducers are installed within a small custom pocket in your vessel’s hull or keel, flush to the surface. Though retrofit installation is possible, these transducers are most commonly used in vessels with a suitable pre-cut pocket. bandwidth – greater opportunities to detect fish in the water column Superior resolution – precise separation between baitfish and gamefish represented on the display with crisp images Enhanced bottom fishing – resolve targets close to the bottom or near structure/wrecks Amazing detail – recognize haloclines and thermoclines Improved signal to noise ratio – find fish and track bottom at high boat speeds AIRMAR®, DEFINING CHIRP TECHNOLOGY. Advantages: • All the benefits of a thru-hull without the need for a high-performance fairing • Can accommodate any deadrise angle based on pocket construction • Can be used with all propulsion types • Reliable, accurate sonar performance with less

カタログの1ページ目を開く

Why does frequency matter? High Frequency = Greater Detail (ex. 130-210 kHz) Selecting the best frequency for your specific application is very important. The good news is that once you know what frequency will work best for the type of fishing you do, there’s an AIRMAR transducer designed to maximize the performance of your sounder. • More sensitive to small targets and will send back detailed information which will display as crisp, high-resolution images on the echosounder screen • Best for shallower water and popular with anglers fishing at depths less than 1500 feet AIRMAR Chirp...

カタログの2ページ目を開く

• Depth & fast-response water-temperature sensor • Hull Type: Fiberglass and metal stepped, planing or displacement hull types • Hull Deadrise: Can accommodate any deadrise angle • Engine Type: Can be used with all propulsion types 39 mm (1.53”) Cable exit location 7 mm (0.26”) 8-Internal Broadband Ceramic Assemblies Low & High Frequency Wide-Beam Low & High Frequency 25° to 16° beamwidth Maximum depth 3000 ft • High—130 kHz to 210 kHz 10° to 6° beamwidth Maximum depth 1000 ft • 103 kHz of total bandwidth from one transducer 25° to 16° beamwidth Maximum depth 3000 ft • Medium—85 kHz to 135...

カタログの3ページ目を開く

• Depth & fast-response water-temperature sensor • Hull Type: Fiberglass and metal stepped, planing or displacement hull types • Hull Deadrise: Can accommodate any deadrise angle • Engine Type: Can be used with all propulsion types 16-Internal Broadband Ceramic Assemblies 19° to 10° port/star 10° to 5° fore-aft beam Max. depth 6000 ft • High—130 kHz to 210 kHz 8° to 4° beamwidth Max. depth 1500 ft • 117 kHz of total bandwidth from one transducer 19° to 10° port/star 10° to 5° fore-aft beam Max. depth 6000 ft • Medium—80 kHz to 130 kHz 13° to 8° beam Max. depth 3000 ft • 87 kHz of total...

カタログの4ページ目を開く

• Depth & fast-response water-temperature sensor • Hull Type: Fiberglass and metal stepped, planing or displacement hull types • Hull Deadrise: Can accommodate any deadrise angle • Engine Type: Can be used with all propulsion types 348 mm (13.71”) 25-Internal Broadband Ceramic Assemblies Low & High Frequency Wide-Beam Low & High Frequency 23° to 9° port-starboard 11° to 5° fore-aft beamwidth Maximum depth 10000 ft • High—130 kHz to 210 kHz 8° to 4° beamwidth Maximum depth 1500 ft • 112 kHz of total bandwidth from one transducer 23° to 9° port-starboard 11° to 5° fore-aft beamwidth Maximum...

カタログの5ページ目を開く

The Chirp Advantage Traditional sounders operate at only two discrete frequencies – typically 50 kHz and 200 kHz. This results in limited depth range, resolution, and ultimately what targets can be detected in the water column. In contrast, AIRMAR’s game-changing Chirp-ready transducers provide over 70+ kHz of bandwidth. Transmitting over a wide frequency band results in a greater o pportunity to detect what is in the water column. As a result, all targets detected in the entire bandwidth will be seen on the display–even those fish holding close to the bottom–ultimately improving target...

カタログの6ページ目を開く

Pocket/Keel Mount 1 / 6ページ

カタログの抜粋

Airmarのすべてのカタログとパンフレット

Pocket/Keel Mount
1 / 6ページ