カタログ >
Airmar >
P319 B117 Thru-Hull

P319 B117 Thru-Hull
1 / 2ページ

カタログの抜粋

Minimize Your Drag The P319 and 8117 feature Airmar's 50/200 kHz, dual-frequency, single-ceramic element in a low-profile housing. Plastic and bronze models are available to accommodate all hull materials. The nearly flush design minimizes drag with only 5 mm (2/10") extending outside the hull. Thru-Hull Low-Profile Applications ■ Planing hull powerboats ■ Sailboats Features ■ Industry standard for low-profile transducers ■ Depth only or depth and temperature • Good target detail in shallow water at 200 kHz and good deep-water bottom tracking at 50 kHz ■ Right-angle cable exit gives low clearance and protection when transducer is stepped on ■ Included rubber washer allows tightening of the hull nut to irregular hull surfaces ■ Housings are ABYC H-27 compliant ■ Optional temperature sensor ■ Plastic or bronze housings available ■ Boat size: up to 8 m (25')

カタログの1ページ目を開く

MAXIMUM DEPTH RANGE BEAM DIAMETER VS DEPTH Weight: Plastic—0.6 kg (1.3 lb) Bronze—0.9 kg (2.0 lb) Hull Deadrise: Best performance on hull deadrise angle through 7°. Can accommodate up to a 12° deadrise angle. Acoustic Window: Urethane Hole Diameter: 51 mm (2") [flAIRMAIT IUH I TECHNOLOGY CORPORATION ©Airmar Technology Corporation P319_B117_rF 07/30/19 As Airmar constantly/ improves its products, all specifications are subject to change without notice. All Airma r products arh designed to ferov'ide a high level ofaccuracy and reliability, however theyshould onlybeused as aids...

カタログの2ページ目を開く

P319 B117 Thru-Hull 1 / 2ページ

カタログの抜粋

Airmarのすべてのカタログとパンフレット

P319 B117 Thru-Hull
1 / 2ページ