カタログ >
Airmar >
B175MW Medium Ultra-Wide Brochure

B175MW Medium Ultra-Wide Brochure
1 / 2ページ

カタログの抜粋

B175MW Tilted Element Thru-Hull Medium Frequency Ultra-Wide Transducer AIRMAR’s innovative transducer designs have revolutionized the fishing world, and they continue to do so with the NEW Chirp-ready B175 Medium Ultra-Wide (MW) Tilted Element™ Thru-hull transducer. The B175MW takes transducer design and performance to a whole new level by using medium frequency (60-100 kHz) with an incredible ultra-wide beamwidth ranging from 57-73° port-starboard to 16° average fore-aft. Maximum coverage under the boat is achieved with this medium-frequency transducer, serving anglers who target pelagic species in the upper water column. Airmar’s new Medium Ultra-Wide models are perfect for seeking deeper species with a frequency band from 60‑100 kHz. When paired with our other popular models such as the B275LHW, provides the angler with a broad set of frequencies (Low, Medium-Wide, High-Wide) to interrogate targets from deep to shallow. The B175MW Tilted Element Thru-hull is a 1 kW transducer housed in one of AIRMAR’s most popular Tilted Element housings which includes a ceramic element fixed at a 20°, 12° or 0° angle. Because the transducer is installed almost flush to the hull, the tilted element corrects for the hull deadrise and orients the ceramic element vertically to ensure maximum echo returns to the transducer. AIRMAR®...ACHIEVE SONAR SUPERIORITY The B175MW is available in three Tilted Element models: • Fixed 20° tilted version for 16° to 24° hull deadrise • Fixed 12° tilted version for 8° to 15° hull deadrise • Fixed 0° tilted version for 0° to 7° hull deadrise Features • Depth and fast-response water-temperature sensor • 1 kW with depth tracking down to 400 m (1,300') • Medium frequency: 60-100 kHz ū 57° to 73° beamwidth (port/starboard) ū 16° average fore/aft • 40 kHz of total bandwidth from one transducer • Medium frequency for superior mid-depth performance and excellent fish-target separation • Bronze housing for use on stepped, planing or displacement hull • Low-profile, thru-hull housing yields good resolution at speed when

カタログの1ページ目を開く

B175MW Chirp-Ready Technical Data – 60 kHz to 100 kHz TVR in dB re 1µPa/Volt at 1 m dB Transmit Radiation Pattern 30° Fore-AFT Axis Port-Starboard Axis Fore-AFT Axis Port-Starboard Axis Port-Starboard Axis Spacer washer 56 mm (2.20") Thread Free Area * For Stainless Steel models, an isolation ring is required. See Owner’s Guide for proper installation. www.airmar.com ©AIRMAR Technology Corporation As AIRMAR constantly improves its products, all specifications are subject to change without notice. All AIRMAR products are designed to provide high levels of accuracy and reliability, however...

カタログの2ページ目を開く