Text version of the page

COMPOSITE SHIELD

Page 1 of 2 DESCRIPTION COMPOSITE SHIELD is a high performance, semi-permanent release coating specifically formulated for use with advanced molding materials in industries requiring assured contamination free fail-safe processing. It also offers effective multiple release efficiency with a wide range of molding compounds. For NON-VOC release agents, request technical data on ENVIROSHIELD. COMPOSITE SHIELD benefits are : * True semi-permanent multiple release capability * No build-up on mold * Ease of Application * Thermal Stability (> 900 q F/480 q C) * Fast Cure * No Transfer * Controlled Release (reduces possibility of Pre-Release) * Easy Recoat/Touch-Up TYPICAL PROPERTIES Appearance & Odor : Clear, thin, liquid with characteristic solvent odor Carrier : Aromatic Naphthas Flash Point [C.C] :

>100 q F/38 q C

Coverage : 1200 Sq. Ft./Gallon Wt./Gallon : 7.29 lbs./Gallon Cure Mechanism : Chemical cross-linking and bonding following solvent evaporation and reaction with atmospheric moisture

NOTE :

Product is moisture-sensitive. Container must be kept tightly closed when not in use. USES COMPOSITE SHIELD is specified for releasing polyester, fiberglass, epoxy, graphite composites, polyimides, polybismaleimides, polyethylenes, polycarbonates, and other materials. SURFACE PREPARATION Before applying COMPOSITE SHIELD , all previous waxes or oils should be removed using SURFACE CLEANER , and a suitable mold sealer should be applied . If surfaces have been coated previously with a semi-permanent release agent, it may be possible to simply solvent wipe, dry, and apply COMPOSITE SHIELD directly on top of existing surface. A test patch should be done to confirm this possibility. MOLD CLEANING SURFACE CLEANER is a combination of solvents specially blended to aid in the preparation of new and used molds/tools prior to treatment with ZYVAX MOLD SEALERS AND RELEASE AGENTS. It readily removes waxes and other surface contaminants without harming or dulling the working surfaces of the mold.