• Products
  • Catalogues
  • News & Trends
  • Exhibitions

ZAR MINI – RIB 14 DL - 2 Pages

  1. P. 1

  2. P. 2

Catalogue excerpts

Bare boat weight    91 kg No of chambers Engine recommended Engine max. Engine weight max. Tube material Shaft length Floor type Keel Hull Bow locker Boat design category 4 14.7 kw 22.4 kw 90 kg CSM(Hypalon**), PVC Short flat Deep V Aluminium RIB hull Standard C 4 22.4 kw 37.5 kw 110 kg CSM(Hypalon**), PVC Long flat Deep V Aluminium RIB hull Standard Our ZAR mini™ RIB PRO line has different sizes and versions. All boats are equipped with a standard bow locker (“L”) and a flat double flooring (“D”). RIB16 is also available with a large bow sunbed and bow locker (“S”). As optional equipment there are many steering consoles and seating options available. You can also choose from a variety of sunroofs, bilge pumps, cushions and many more things. Please ask your ZAR mini™ dealer. He can serve you best. The ZAR mini™ RIB PRO line can easily pull water toys, waterski (from25hp) and tubes with the two installed D-rings on the transom. Every ZAR mini™ has three lifting Davit lifting points. One in the bow and two on the transom. If your ZAR mini™ has a bow locker, you will have four lifting points. Due to the very light aluminum hull it can go very fast and plan easily with a smaller engine. The aluminium hull will not face any problems for gel coat defects. It will also last longer and not become heavier during use. The aluminum hull is being specially manufactured and powder coated to resist corrosion and saltwater. You will have a lot of fun with your ZAR mini™ RIB. All RIB PRO inflatables from ZAR mini™ until RIB14 have a 5 layer reinforced high quality 1.100 dtex PVC materialwith a weight of 1.050g/m2 and a thickness of 0.9mm. All RIB PRO inflatables from ZAR mini™ starting from RIB15 have a 5 layer reinforced high quality 1.100 dtex PVC material with a weight of 1.500g/m2 and a thickness of 1.2mm. All ZAR mini™ RIB inflatables are also available in CSM (formally known as Hypalon™ from DuPont™) with a special design. Please ask your ZAR mini™ dealer, for further details. CSM lasts much longer than PVC and is more resistant toward UV light, acid, alkalis, saltwater, heat and cold. We use Hypatex™ that is one on the best material on the world market today. It has been manufactured since 60 years. All PVC seems of our ZAR mini™ tube chambers are welded. All boats feature an overpressure valve, as standard equipment, that will protect your tube when inflated properly. High quality material's paired with constant research & development are the key to success. Every single ZAR mini™ inflatable boat passes a very strict quality control, before we deliver it to our valued customers. Just in case a mistake passes the quality control, you will be protected by our limited 2 years warranty after registering your boat with us. With our large standard equipment and our modern Italian Design, the ZAR mini™ inflatables are one of a kind. Starting from RIB14 you will have an extra wide bow. For all kind of watersport you can find your matching ZAR mini™ RIB. Waterskiing, cruising, SCUBA diving, fishing or as a tender to your yacht. ZAR mini™ RIB is able to satisfy your expectations. * starting from November 2016 ** The bare boat weight is just the weight of the boat without any removable accessory. CSM material is formally known as Hypalon. Diffrence in colour! All technical details can change without prior notice. All standard equipment and technical data may vary without prior notice! Pictures might show optional equipment not included in the standard equipment of the boat.

 Open the catalogue to page 1

All ZAR mini GmbH catalogues and brochures

  1. RIB 11 DL

    4 Pages

    En
  2. RIB 8 DL

    4 Pages

    En