6LPA-STZP2 - 2 Pages

Add to MyNauticExpo favorites
6LPA-STZP2
  1. P. 1

  2. P. 2

Catalog excerpts

Yanmar type 6LPA-STZP2 Configuration 4-stroke, vertical, water cooled diesel engine Maximum output at crankshaft * 232 kW (315 mhp) / 3800 rpm ** 225 kW (306 mhp) / 3800 rpm Continuous rating output at crankshaft 211 kW (286.4 mhp) / 3682 rpm Displacement 4.164 L (254 cu in) Bore x stroke 94 mm x 100 mm (3.70 in x 3.94 in) Cylinders 6 in line cylinders, 4- valves per cylinder Combustion system Direct injection Aspiration Turbocharged with intercooler Starting system Electrical starting 12 V - 2.5 kW Alternator 12 V - 80 A Cooling system Fresh water cooling by centrifugal fresh water pump and rubber impeller seawater pump Lubrication system Enclosed, forced lubricating system Direction of rotation (crankshaft) Counter clockwise viewed from flywheel side Dry weight without sterndrive 428 kg (944 lbs) Environmental EU RCD, US EPA Tier 2, BSO II & EMC Engine mounting Rubber type flexible mounting NOTE: Fuel condition: Density at 15°C = 0.84 g/cm 3; 1kW = 1.3596 mhp = 1.3410 HP * Fuel temperature 25°C at the inlet of the fuel injection pump (ISO 3046-1) ** Fuel temperature 40°C at the inlet of the fuel injection pump (ISO 8665) (For detailed line-drawings, please refer to our web-site: www.yanmarmarine.com) 344 mm (13.5in) Right side view 287 mm (11.3 in) 287 mm (11.3 in) SEAWATER INLET ø44.5 76.6 mm (3.0 in) 716.4 mm (28.2 in) 1145.3 (450.3 in) 114 mm (4.5 in) 13 mm (0.5 in) 288 mm (11.3 in) 5.5 mm (0.2 in) 333 mm (13.1 in) (TURBO C.L.) FUEL OVERFLOW ø9/ø16 Max112 mm (4.4 in) 237 mm (9.3 in) 505 mm (19.9 in) 3.5 mm (0.4 in) FUEL INLET ø9/ø16 57 mm 51 mm (2.2 in) (2.0 in ) 553 mm (21.8 in) 649.6 mm (143.7 in) / (TURBO C.L.) 775 mm (30.5 in) 342 mm (13.5in) 562 mm (22.1 in) 408 mm (16.1in) Front view Min 92 mm (3.6 in) Dimensions 998 mm (39.3 in) 6LPA-STZP2 Bravo2 Sterndrive

 Open the catalog to page 1

Performance Curves (Output is according iso 8665) Fuel Consumption Yanmar Sterndrive engine set 1. Inner and outer transome surface must be parallel within 3mm in area covered by transome plates and remain within transome thickness limits. 2. Dwg, shows mounting blocks at compressed height of approximately 4mm. Instrument Panels Note: O = Equipped on panel X = Not equipped on panel Standard Package • Sensor for instrument panel (New B, C and D-type) • Exhaust mixing elbow (L-type) • Cooling water hoses •Analog instrument panels (New B,C and D-type) • Exhaust mixing elbow, U-type (high riser) •...

 Open the catalog to page 2

All Yanmar Europe BV catalogs and brochures

  1. CHS Marine

    26 Pages

    En
  2. 6AYL series

    1 Pages

    En
  3. 4HAL2 series

    1 Pages

    En
  4. 6CHL series

    1 Pages

    En
  5. 6HAL2-TN

    1 Pages

    En
  6. 4CHL series

    1 Pages

    En
  7. 6AYEM

    4 Pages

    En
  8. CHS RANGE

    26 Pages

    En
  9. 2YM15 - SD25

    3 Pages

    En
  10. 1GM10 - SD25

    3 Pages

    En
  11. 3YM27A

    1 Pages

    En
  12. 6EY17W

    1 Pages

    En
  13. 6AYEM-ET

    28 Pages

    En
  14. 6LY2A-UTP

    2 Pages

    En

Archived catalogs

  1. ZT350 Sterndrive

    6 Pages

    En
  2. 6SY-720

    2 Pages

    En
  3. 6SY-650

    2 Pages

    En
  4. 6BY2-260Z

    2 Pages

    En
  5. 6LY3-STC

    2 Pages

    En
  6. 6LY3-UTC

    2 Pages

    En
  7. 6LY3-STP

    2 Pages

    En
  8. 6LY3-UTP

    2 Pages

    En
  9. 4BY2-180Z

    2 Pages

    En
  10. 4BY2-180

    2 Pages

    En
  11. Saildrive SD20

    3 Pages

    En
  12. 8SY-900

    2 Pages

    En
  13. 6CX-530

    2 Pages

    En
  14. 6LY3-ETP

    2 Pages

    En
  15. ZF Pod drive

    6 Pages

    En