YACHT CRADLES - 2 Pages

Add to MyNauticExpo favorites
YACHT CRADLES

Catalog excerpts

THE YACHT LEG & CRADLE COMPANY LTD Hamilton House, 70 Reading Road Henley-on-Thames, Oxon e-mail sales@yachtlegs.co.uk MOTOR BOAT SUPPORTS The Light Weight Support is designed for small craft up to 6 tons displacement where the distance from the ground to the underside of the chine is no more than 3'3" (1 OOcms). The Standard Support weighs just 15kg and can be easily manoeuvred by one person. The angle of the hull pad is fully adjustable and the height can be raised from a minimum 87cms to a maximum 127cms. Four supports are sufficient for a craft of up to 30 feet and further supports can then be added for larger vessels as required. For example, we would recommend six supports for a 36 foot 10 ton craft and eight for a 40 foot 12 ton vessel. The Heavy Duty Support is designed for motor boats above 15 tons displacement. These even more powerful supports extend from 117cms up to 21 Ocms to take larger craft, they weigh 22kg each. With these supports just four are needed for a 40 foot boat and our recommendations are for 6 at 50 foot /15 tons and 8 at 60 foot / 20 tons. All models are of steel construction and galvanized to BS 729 PB 6 LIGHT WEIGHT SUPPORT n Minimum height 70cms (2'3") - Maximum 10Ocms (3'3") n Weight per unit 10 kilos n Pad size 250mm x 125mm with protective hull covering n Fully pivoting to suit all hull contours n Stackable (nests) for easy freight and storage n Weight per unit 15 kilos n Pad size 375mm x 150mm with protective hull covering n Fully pivoting to suit all hull contours n Attachment points to allow interlinking of units with OPTIONAL EXTRAS AVAILABLE n Heavy Weather Lashing Kits PB 20 HEAVY DUTY SUPPORT n Minimum height 117cms (3'10") - Maximum 21 Ocms (6'10' n Weight per unit 22 kilos n Pad size 400mm x 200mm with protective cover and fully pivoting head r Suitable for Motor Boats over 15 tons displacement n Attachment points to allow linking by chain or webbing to provide additional stability KB 1 Keel Base Stand n Minimum height 50cms (20") - Maximum 67cms (26") n Weight per unit 27 kilos n Safe working load 5 tons per stand THE YACHT LEG & CRADLE COMPANY LTD Hamilton House, 70 Reading Road, Henley-on-Thames, Oxfordshire, RG9 1AU, Englanc e-mail sales@yachtlegs.co.uk website www.yachtlegs.co.uk YACHT CRADLES

 Open the catalog to page 1

YACHT CRADLES Three types of yacht cradles are available, namely Transportable, Stackable, and Extra Large. Transportable cradles are designed for boatowners who need to remove the cradle from site when not in use. They are modular and can be extended with additional keel base and arm sections. Stackable cradles are designed for use in boatyards where they can be folded flat to save space. No boat should be stored with the mast in place and the ground must be level and stable. All cradles are manufactured in mild steel Two new galvanised steel yacht cradles, designed for yachts between 40'...

 Open the catalog to page 2

All The Yacht Leg & Cradle Co catalogs and brochures

  1. YACHT LEGS

    2 Pages