• Products
  • Catalogs
  • News & Trends
  • Exhibitions

PBK-12/24 - 2 Pages

Add to MyNauticExpo favorites
PBK-12/24
  1. P. 1

  2. P. 2

Catalog excerpts

CABLE CONNECTION INSTRUCTION: PUMP SWITCH-12V, PUMP SWITCH-24V Cable Number Cable Mark Cable Length Cable Colour DON’T CUT THE MANUAL CABLE (2) CABLE END MUST NOT BE UNDER THE POSSIBLE WATER LEVEL PUMP SWITCH

 Open the catalog to page 1

FIXING INSTRUCTION Pump Switch English 1. Description: When the level rises to the top of the Pump Switch (80 mm from bottom), it will automatically start the pump, and keep the pump running until level is ca. 20 mm from bottom of the Pump Switch. Then the pump stops. The Manual Switch is used for running the pump manually. The pump will run as long as the Manual Switch is on. 2. Installation: a. Follow Fig.1, choose proper position to fix the clip with screws. The bottom of the Pump Switch and the suction on the pump shall be on level. b. Insert the Pump Switch into the clip to the position of...

 Open the catalog to page 2

All Wema System catalogs and brochures

  1. Rudder indicator

    1 Pages

    En
  2. S5 fuel sender

    2 Pages

    En
  3. S3 fuel sender

    2 Pages

    En
  4. Wema Group

    20 Pages

    En
  5. TN SENSOR

    2 Pages

    En