| | | | | | | | |
| | | |
| | HYDRAULIC STEERING SYSTEMS, 30-175 KGM | |
| | | |
| | Many VETUS clients like to determine the cylinder/pump unit combination themselves so as to arrive at the required number of steering wheel revolutions. Note: the smaller the number of revolutions, the more force must be applied to the steering wheel. please see adjacent page for choice of options. | Steering pump without non- Steering pump with built-in return valve or pressure relief non-return valve and incorporated valve. See page 45. pressure relief valve. See page 45. | |
| | | |
| | | DUAL STATION CONTROL All VETUS steering pumps have a 0 W shaft, tapered 1:12. By virtue of this, almost all marine steering wheels available on the market, including the VETUS wheels, can be fitted. Please see also page 48 and 49. | |
| | | |
| | HOW TO ORDER? A hydraulic steering system consists of: one or more steering pump(s), a separate valve block or built-in non-return valve(s), as the case may be and the required length of tubing, made of nylon, copper or steel. | |
| | | |
| | SINGLE STEERING POSITION One steering pump with or without built-in non-return valves. One cylinder. Hydraulic tubing (plus accessory fittings, as required). Hydraulic fluid (see page 47). Options: separate dual non-return valve by-pass valve (see page 47). | DUAL STEERING POSITION Two steering pumps with built-in non-return valves. Alternatively: two steering pumps without non-return valves, in which case a separate dual non-return valve block must be fitted. One cylinder. Hydraulic tubing (plus accessory fittings, as required) Hydraulic fluid (see page 47). Option: by-pass valve (see page 47). | MTC52 Stroke: 160 mm Length of tiller arm: 140 mm ■villi52 volume: 104 cm3 Weight: 3.4 kg | |
| | | |
| | VETUS TILTING STEERING PUMPS TYPE HTPT | |
| | | |
| | MTC72 Stroke: 225 mm Length of tiller arm: 196 mm Volume: 146 cm3 Weight: 3.8 kg | |
| | | |
| | These steering pumps are provided with a tilt mechanism, allowing the steering wheel to be locked in 5 different positions, over an arc of 48°. This device ensures that the steering wheel can be adjusted to boat suit both seated and standing steering positions. The steering wheel shaft is made of stainless steel. All other visible parts are made of black rubber or corrosion free synthetic material. These pumps are supplied with built-in non return valves and pressure relief valve and feature the same technical specifications as type HTPR steering pumps. This pump is designed for through bulkhead installation. Weight: 6,6 kg. | | Stroke: 160 mm Length of tiller arm: 140 mm Volume: 253 cm3 Weight: 7.1 kg | |
| | | |
| | HYDRAULIC FLUID HEADER TANK This transparent tank can be installed with all Vetus steering pumps up to 89 cm3 per revolution. It is also recommended for electro-hydraulic hatch lifters, when operating more than one cylinder. It has a capacity of about 200 cm3 and is supplied with a large vented screw cap, for easy filling and a mounting bracket. The tank comes complete with 1 metre of 0 8 mm hose, two matching hose clips, one G % and one G 3/8 nylon hose pillar. | |
| | | |
| | | | Stroke: 225 mm Length of tiller arm: 196 mm Volume: 356 cm3 Weight: 8 kg | |
| | | |
| | | | | |
| | 044045_09.indd 1 CHge'S 04-08-2008 14:59:25 | |
| | | |
| | | | | | | | |