| | | | | | |
| | | |
| | | |
| | | | | |
| | | |
| | | |
| | This control panel when connected to a make or make/break relay can be used for hauling in and releasing the anchor. It has an on/off switch and LED and is suitable for both 12 and 24 Volts D.C. Dimensions are 85 x 85 mm and the build in depth is 78 mm. Watertight to IP65. | |
| | | |
| | This radio control may be used for remote operation of VETUS bow and/or stern thrusters and anchor windlasses. Two models are available: • Model REMCO1, consisting of 1 receiver and 1 hand-held control with 4 push-buttons, for one anchor windlass or one bow thruster. • Model REMCO2, consisting of 2 marine receivers and 1 hand-held control with 4 push-buttons, for operation of both the anchor windlass and the bow thruster, or alternatively, the bow and stern thruster. This remote control is also suitable to operate other electrically driven equipment on board for boat. Additional hand-held controls (transmitters) are available separately; please see the price-list. | This electric remote control consists of: a rocker switch with a capacity of 20 A, suitable for 12 and 24 Volt D.C., and a three-core spiralled wire of 3,5 metres in length, complete with watertight plug and socket. This remote control comes in handy for the operation of: bow and stern thrusters, anchor windlasses, remote controlled gangways, electric cranes suppliers, hydraulic steering systems, etc. A stainless steel hanger loop is fitted on the back. | |
| | | |
| | The REMCO radio receiver complete with wiring and multi-plugs is suitable for direct connection to all VETUS electric bow or stern thrusters. Additional wiring for operation of a VETUS hydraulic bow or stern thruster is available as an extra. | |
| | | |
| | REMCO1 REMCO2 Frequency: 433,92 Mhz. Suitable for 12 and 24 Volt D.C. Maximum range: 50 metres Guaranteed range: 15 metres Maximum capacity: 25 A at 12 Volt. Hand-held control watertight to IP67 and supplied with neck lanyard. | |
| | | |
| | | |
| | | |
| | | | |
| | | |
| | | | | | |