| | | | | | | | | |
| | | |
| | | |
| | | |
| | REMOTE CONTROL PANEL FOR NAPOLEON ELECTRIC ANCHOR WINDLASS This remote control panel can be used to haul-in or release the fixing chain. It has an illuminated LCD screen, providing indication of: - the programming menu - the chain speed, both hauling in or releasing - the length of chain released - the supply voltage and current consumption In addition, a programmable cut-out may be set, so that the windlass will stop automatically as the anchor arrives at the bow roller. The panel can be set to read in metres or feet and is suitable for both 12 and 24 Volt installations. Watertight according to IP 65. | | |
| | | |
| | Dimensions: 100 x 100 x 32 mm Current drain: 5 - 40 mA | |
| | | |
| | Hand operated push-button switches. | These watertight (IP65) foot switches may be used instead of, or in addition to the pushbutton switches, of course always in combination with one or two relays. The foot switches have a protective cover, to avoid accidental engaging of the solenoids. Available with red (up) or grey (down) covers. | | |
| | | |
| | | | AFST1512D S0L324D* S0L1512D* AFST324D | |
| | Make relay for lifting only of all types of electric anchor windlasses, with a motor of maximum 1,5 kW at 12 Volt or of 3 kW at 24 Volt D.C. For hauling and releasing, two of these control switches may be fitted. * Watertight to IP65. | | |
| | Make/break relay for hauling in and releasing the anchor using a windlass with a motor of maximum 1,5 kW output at 12 Volt DC or of 3 kW at 24 Volt DC. | |
| | | |
| | | |
| | | |
| | Make relay for lifting only of all types of electric anchor windlasses, with a motor of maximum 6 kW at 24 Volt. For hauling and releasing, two of these control switches may be fitted. 40 www.vetus.com | AFST624D Make/break relay for hauling in and releasing the anchor using a windlass with a motor of maximum 6 kW output at 24 Volt D.C. | |
| | | |
| | | | | |
| | 040041_09.indd 1 Cloge'S 04-08-2008 14:49:22 | |
| | | |
| | | | | | | | | |