Catalogues - vetus-catalog

ueiiis

BOW ROLLERS AND HOLDER CHAIN

HINGED


Type	L	B	H	h
Asterix	320	92	72	133
Obelix	430	160	100	190

POLLYW

FIXED


Type	L	B	H
Polly	205	72	74
Francis	320	86	74
Ed	444	110	110

TYPE POLLY AND FRANCIS

Suitable for marine rope and chain of up to 8 mm (⁵/w").

HOLDER CHAIN

For an anchor windlass to function correctly, it is absolutely essential that the anchor chain is correctly matched to the windlass gipsy. VETUS can supply calibrated anchor chain, in lengths of 30, 50 or 100 metres. Because of its smoother finish, stainless steel chain flakes itself more easily and evenly into the chain locker.


D	T	L	B
8	24	264	26
10	28	308	34
13	36	396	44

CHAIN

CHAINSS

With the ASTERIX and OBELIX bow rollers the anchor can be pulled up and stored very easily via the Nylon rollers and the cleverly designed hinging system.

VETUS steel anchor chain is hot dipped galvanized and calibrated according to DIN 766. It may be subjected to the following loads:


8 mm	working load 825 kg	min breaking load 3300 kg (33 kN)	1,35 kg/m
10 mm	working load 1250 kg	min breaking load 5000 kg (50 kN)	2,25 kg/m
13 mm	working load 2150 kg	min breaking load 8600 kg (86 kN)	3,8 kg/m

STAINLESS STEEL

CHAIN STOPPER

For 8 or 10 mm anchor chain. Prevents damage to the drive mechanism of the anchor winch manufacturer. Rated up to 2500 kg load.

VETUS stainless steel anchor chain is polished type AISI 316 and calibrated according to DIN 766. It may be subjected to the following loads:


8 mm	working load 800 kg	min breaking load 3400 kg (34 kN)	1,35 kg/m
10 mm	working load 1260 kg	min breaking load 5300 kg (53 kN)	2,25 kg/m
13 mm	working load 2120 kg	min breaking load 8500 kg (85 kN)	3,8 kg/m

038039_09.indd 2 Edge's 04-08-2008 14:47:08