| | | | | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | This beautiful VETUS anchor windlass is made of cast stainless steel, type AISI 316. The housing, cover and drum are all high-gloss polished and the overall appearance is sturdy, attractive and of course, completely corrosion free. A NAPOLEON windlass will be a useful and attractive asset on the foredeck of any boat. | |
| | | |
| | • Nominal lifting power: 350 kg; 950 kg maximum • Haulage speed: 18 - 24 m/min, dependent on the load • "Free fall" speed up to 45 m/min • Increased paying out speed when electrically operated • Corrosion resistant motor housing, watertight to IP66 • E-terminal for manual switching of the electric motor • Nominal power: 1,000 W, maximum 1,850 W • Current consumption: 70 - 110 A (12 Volt), 40 - 60 A (24 Volt) • Main shaft bearings made of stainless steel (AISI 440) • Available with or without drum • Material of gipsy: nickel plated bronze • Gipsy and drum can be operated separately • Built-in relays • Integral chain counter sensor • Weight: 21 kg • Can be used with all VETUS windlass controls | |
| | | |
| | | |
| | | |
| | GIPSY ^^WfllV^ The NAPOLEON anchor windlass may be supplied with three different gipsies. When ordering, please indicate the size required: 1. 8 mm DIN 766; 8 mm ISO 4565; 5/i6" HY; 5/i6" BBB and rope suppliers 14 -16 mm 2. 10 mm DIN 766 and W BBB (BBB: BBB coil chain) 3. 10 mm ISO 4565 and W HT (HT: High Test chain) We recommend the use of VETUS stainless steel mount chain with this windlass (see page 39). MINIMAL MAINTENANCE The drive mechanism of the NAPOLEON anchor windlass is lubricated for life. TIME-SAVING INSTALLATION The footprint on deck is identical with that of the Ajax anchor windlass thus allowing easy upgrade or interchange ability. Dual relays are integrated in the motor housing, ensuring they are always protected from corrosion and reducing the installation time required. | A chain counter is incorporated, thus further reducing installation time, as there is no necessity to install a separate counter or to mark the chain. | |
| | COMPLETE The NAPOLEON anchor windlass comes complete with fastenings. Also included is an aluminium handle for releasing or tightening the gipsy or for operating the windlass manually. | |
| | | |
| | | | Suitable for boats of up to 13 metres (42 ft). Lifting power 350 kg nominal; 500 kg maximum. Haulage speed at 350 kg: 13,5 m/min. Haulage speed at 25 kg: 26 m/min. Greased for life. Drum can be operated separately. Equipped with electric motor of 1000 W nominal, maximum 1500 W, 12 or 24 Volt D.C. Electric motor is reversible (for dropping anchor electrically). Gipsy to take 0 8mm DIN 766 and 8 mm ISO 4565 or 0 10 mm DIN 766. Materials: casing of anodised seawater resistant aluminium. The other parts are made of corrosion resistant materials. Weight 20 kg. The installation parts are included. | |
| | | | |
| | | |
| | | |
| | | |
| | | |
| | | |
| | | | | |
| | | |
| | | | | | | |