Catalogues - vetus-catalog

PRESSURIZED WATER SYSTEMS

Comparable with the piped water system at home, the VETUS pressurized water system provides constant water flow in the vessel's fresh water circuit. The pressurized tank with a rubber diaphragm inside, prevents the pump motor from being started, each time a supply of water is required. This assembly ensures a minimum of noise, a constant water flow and a saving of energy.


WATER SYSTEM	TYPE 8	TYPE 19
• contents of pressure tank	8 litre	19 litre
• available in	12 Volt (3,9 A)	12 Volt (6 A)
	24 Volt (2,0 A)	24 Volt (2,5 A)
• connection for hose	0 12,7 mm	0 19 mm
• weight	6,2 kg	7,5 kg
• capacity	12,5 l/min.	17 l/min.
• max. pressure	2,5 bar (35 psi)	2,8 bar (39 psi)
• max. suction height	3 m	3 m
• extremely low noise level
• equipped with:
- self-priming pump
- inlet water-strainer
- pressure switch
- pressurized tank with rubber
diaphragm and mounting bracket
- the diaphragm is suitable for drinking
water and can be replaced

TYPE 8

TYPE 19

PRESSURIZED WATER SYSTEMS WITH ADJUSTABLE PRESSURE SWITCH


WATER SYSTEM	TYPE 8	TYPE 19
• contents of pressure tank	8 litre	19 litre
• available in	12 Volt (3,9 A)	12 Volt (6 A)
	24 Volt (2,0 A)	24 Volt (2,5 A)
• connection for hose	0 12,7 mm	0 19 mm
• weight	8,2 kg	9,5 kg
• capacity	12,5 l/min.	17 l/min.
• max. pressure	2,5 kg/cm²	2,8 kg/cm²
• max. suction height	3 m	3 m
• extremely low noise level
• equipped with:
- self-priming pump
- inlet water-strainer
- adjustable pressure switch
- manometer (pressure gauge)
- pressurized tank with rubber
diaphragm and mounting bracket
- additional non-return valve
- the diaphragm is suitable for drinking
water and can be replaced

TYPE 8

HYDRF

TYPE 19


		u
	*□ I*	□ □ HYDRF1220
	*-	HYDRF2420
		19 L
	m	[—1

ELECTRIC BILGE PUMPS

BILGE WATER/OIL SEPARATOR

Submersible bilge pumps for sailboat boats often need to pump the bilge water to a head of more than 1 m. When comparing capacities of subermersible bilge pumps, please look at the outputs at "zero head"and at a head of 1 m. All these VETUS pumps are made in conformity with the specification requirements of ABYC H - 22, of ISO 8849 Marine and of the U.S. Coast Guard Safety Standards 33 CFR, Part 183.

This VETUS separator collects and retains oil and grease from the bilge water. The filter element is replaceable and has a capacity of

320 grams, which is the average quantity of oil in 8.000 litres of bilge water. It will remove 95%

of oil in the bilge water, with a maximum contamination level of

300 mg/l (p.p.m.) The bilge pump

to be used in combination may

have a maximum capacity of

25 litres/ minute. The connections

are for 0 19 mm hoses

(see page 102).

EBP

EBPFLOAT2


Technical data:
Model	Ca pacity	Capacity	Vol-	Am pe-	Inside	Total	Dia-	Weight
	in l/min	in l/min.	tage	rage	hose	height	meter	in kg.
	at zero	at 1 m			dia-	in mm	of pump
	head	head			meter		housing
	and with	and with			in mm		in mm
	a battery-	a battery-
	voltage	voltage
	of 13.6 V	of 13.6 V
EBP 40	41	27	12	1.0	19	104	99	0.37
EBP60	57	44	12	3,0	28	104	99	0,38
EBP80	79	60	12	2,6	28	125	125	0,52

Dimensions: L x w x h: 148 x 150 x 162 mm.

BISEPI9

KEEP THE EVIRONMENT CLEAN

Automatic float switch

The 12 Volt submersible bilge pump type EBP 40 (depicted here)

has a capacity of 27 litres/min at a head of 1 m and is therefore suitable to be used with this VETUS bilge water/

oil separator.

201

200201_09.indd 3

04-08-2008 12:33:42