| | | | | |
| | | |
| | OC "Reinforcements product information | |
| | | |
| | | | | |
| | Uniconform 300, 450, 600, 750, 900, 1000, 1200, 1800, 2400g/m2 | |
| | | |
| | PRODUCT DESCRIPTION Uniconform® is made of E-glass continuous strands of random orientation without any binder or any stitching yarn. It is a soft product with a high stretchability designed for injection moulding, infusion or wet compression. The continuous strands have a sizing with a coupling agent that makes Uniconform® compatible with Unsaturated Polyester, Vinylester and Boat epoxy resins. PRODUCT REFERENCE Example : UM 600 -125 UM : Uniconform® 600 : Nominal weight per unit area (g/m2) 125 : Roll width (cm) | |
| | | |
| | FEATURES AND PRODUCT BENEFITS | |
| | | |
| | | | | | | | | • 100% continuous glass fibres, no binder and no | • Translucent panel capabilities | | | | synthetic core nor stiching yarn | | | | | • Soft product easy to handle | • Good mechanical properties and isotropy | | | | • Very good surface appearance behind gel coat | • Very good adaptability to molds of complex shapes | | | | • Outstanding fire retard properties (100% glass fibres) | • Uniform glass content on tight radii | | | | • Easy to cut, splice and overlap with reduced waste | • High Z permeability and wet out | | | | | | | | |
| | | |
| | VISUAL CHARACTERISTICS OR POSSIBLE DEFECTS Type A: big filaments (coarse strands) Type B: cluster of glass fibre Type C: water spots Type D: dirt and foreign matters (diameter inferior to 30 mm) Type E: hole | |
| | | |
| | Maximum number of defects allowed: each area of 100 lm of a roll of Uniconform® may contain at most 5 of the defects listed above. | |
| | | |
| | | | | |