| | | | | |
| | | |
| | | | |
| | | |
| | UNIFILO® For Corrugated Sheets And Truck Panels | |
| | | |
| | PRODUCT DESCRIPTION Unifilo® is an E-glass continuous strand mat of random orientation in multiple layers and held together by a binder. | |
| | | |
| | PRODUCT REFERENCE Example : U101 450 -100
| |
| | | |
| | | Continuous strand mat (Unifilo®) Product classification code Nominal weight per unit area (g/m2) Roll width (cm) | |
| | | |
| | PRODUCT APPLICATION • For translucent sheets • For the manufacture of flat sandwich panels for vehicle bodies by continuous impregnation process • As a surface layer in preforms made with the U700 series of preformable Unifilo® mats ; RTM molding | |
| | | |
| | FEATURES AND PRODUCT BENEFITS | |
| | | |
| | Good translucency Available in a wide range of weights, from 150 to 600 g/m2 Customized widths upon request | |
| | | |
| | TECHNICAL CHARACTERISTICS (NOMINAL VALUES) | |
| | | |
| | | | | | | | | | | | | | | | LINEAR WEIGHT OF BASIC STRANDS (TEX) | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
| | | |
| | Refer to the Standard Product Specification for more precise information on the characteristics of the product. | |
| | | |
| | VISUAL CHARACTERISTICS OR POSSIBLE DEFECTS Type A: coarse strands Type B: cluster of glass fibre Type C: water spots Type D: binder spots, dirt and foreign matters (diameter below 30 mm) Type E: hole Maximum number of defects allowed: each 100 lm Unifilo® roll section may contain at most 5 of the above listed defects. | |
| | | |
| | | | | |