2 - GENERALDESCRIPTION OF THE VEGAMK II PANEL 2.5 Functioning warning marine lights

Cool It indicates that the conditioning system is in Cool Mode. If the Vega MK II panel is connected to a Fan Coil unit, the COOLwarning light blinks when the Cool Mode is on but the circulation water temperature is too warm. Heat It indicates that the conditioning system is in Heat Mode. If the Vega MK II panel is connected to a Fan Coil unit, the HEATwarning light blinks when the Heat Mode is on but the circulation water temperature is too cool. Auto It indicates that the fan control is in Automatic Mode. In this case the Vega MK II panel controls the fan speed, increasing or decreasing it automatically to reach and keep the set out temperature (Set Point). When the AUTO warning light is not blinking, the fan is in Manual Mode, so its speed is chosen by the user and it will not change automatically. Fan speed The four warning lights indicate the fan speed: from minimum on the left to the extra- maximum on the right.

2.6 Probes

In the Vega MK II panel there are two probes: Infrared probe, at the top in the center, to communicate with the radio-control device. Temperature internal probe at the bottom under the buttons area. Pag. 4