2 - GENERALDESCRIPTION OF THE VEGAMK II PANEL 2.1 ON / OFF button

It switches on and off the unit.When it is on, the display shows the ambient temperature (or abbreviations, such as U, d, FO if you have set up the corresponding special functions) and also the Heat and Cool and the Fan warning lights for boats. When it is off, the display shows only the ambient temperature.

2.2 S button

Set/Select button. It is used to enter the programming menu (if pressed for 3 seconds) and to confirm the parameters change (if pressed by 5 seconds to save the new value).

2.3 Arrow up/Arrow Down buttons

They have got three functions: 1) When the panel is on, they let enter directly the menus (respectively Arrow Up for SETand Arrow Down for FAN). At this point, it is sufficient to press the S button to enter the respective menus and to display or to change some values or the setting out. 2) They let move in the menus. 3) They let change the parameters values during the programming.

2.4 Display

Display with three numeric characters and seven segments. It display the ambient temperature (both when the panel is on and when it is off). When it is on, it displays also eventual marine alarms, messages or special functioning modes abbreviations. Pag. 3