1 - INSTALLATION IMPORTANT

Check that the program downloaded for Vega MK II corresponds to the unit typeactually connected to.

1.5 Positioning of the panel (Temperature internal probe)

Since the temperature probe installed in the panel feels the ambient temperature, thepanel should NOTbe installed: 1) Directly exposed to the sunlight (for example, in front of a window); 2) In air stagnation areas (for example, between many pieces of furniture or behind doors); 3) In areas next to heat springs (for example, near incandescent marine lamps) In case of anomalies during the functioning due to the panel position, you have to use the external probe (see 1.6), that replaces the probe in the panel.

1.6 Temperature external probe (as option)

External probe (code MSENS) The external probe must be connected to the RJ12 connector "Probe" on the power- marine board in the electrical box. The connection to the external probe excludes automati- cally the internal probe. It is better to fasten the sensitive bulb of this probe on the con- ditioner or the fan coil suction. Pag. 2