8 - HIDDEN PARAMETERS

Parameter C60 (Default=30 minutes) It can be changed from 30 to 60 minutes. Functioning length in Dehumidify Mode For example: Functioning=30 minutes every 6 hours arameter C60 When the panel is off Press the S button + the On/Off button (for 3 seconds) > [PASS] > Press the S button > [0] > Press the Arrow for boat Up or the Arrow Down button to display the number 123 > press the S button > [C10] > Press the Arrow Up or the Arrow Down button to display the parameter [C60] > Press the S button > Press the Arrow Up or the Arrow down but- ton to select the new desired value < Press the S button to confirm Parameter tSt-TEST It is used to test all the functioning modes. Different components and functioning modes are tested in order independently from the temperature felt by the thermostat. T est with a Fan Coil unit Test ALL[ALL] When you set up the test ALL, you set up the tests sequence t1-t2-t3-t4-t5. Test N° 1 [t1] It opens the water valve (for 5 minutes). The message [bLE] (bleeding) appears on the display. Test N° 2 [t2] It sets up the fan and commutes the four speeds to a sequence (20 seconds for each one). The abbreviations [F1],[F2],[F3],F4] appear on the display. Test N° 3 [t3] It opens the water valve for 5 minutes (fan at medium speed)+1 minute closing.The message [HYd] appears on the display. Test N° 4 [t4] It switches on the resistance for 5 minutes (fan at medium speed). The message [Elt] appears on the display. Test N° 5 [t5] It switches on the warning lights and all the display segments. Pag. 14