5 - FAN MODES

Parameter CO3 (Default=C) Temperature measure in C° or F°. How to set the p arameter CO3 When the panel is off Press the S button (for 3 seconds) > [CO1] > Press the Arrow for boat Down button to select [CO3] > Press the S button > Press the Arrow Up or the arrow Down button to select the desired value [C] or [F] > Press the S button Parameter CO4 (Default=d) How to set the p This parameter controls the fan automatic logic. The "d" value decreases the fanspeed until more or less the Set Point. The "U" value increases the speed until more or less the Set Point. arameter CO4 When the panel is off Press the S button (for 3 seconds) > [CO1] > Press the Arrow Down button to select [CO4] > Press the S button > Press the Arrow Up or the Arrow Down button to select the desired value [d] o [U] > Press the S button How to set the p Parameter CO5 (Default=ON) This parameter controls (if possible) the fan functioning when the Set Point is rea-ched. With CO5=ON: the fan continues to work With CO5=OFF: the fan stops arameter CO5 (Default=d) When the panel is off Press the S button (for 3 seconds) > [CO1] > Press the arrow Down to select [CO5}> Press the S button > Press the Arrow Up or the Arrow Down button to select the desired value [ON] or [OFF] > Press the S button Pag. 10